Продукция

WaveSurfer 4024HDR

WaveSurfer 4024HDR

200 МГц, 5 ГГц, 4 канала, 12.5 МБ/канал и цветной сенсорный дисплей с диагональю 12.1"

1 ГГц, 5 ГГц, 4 канала, 12.5 МБ/канал
Полоса пропускания 1 ГГц
Частота дискретизации 2.5 ГГц на 4 канала
Память 25 МБ (при объединении каналов)
Число каналов 4
500 МГц, 5 ГГц, 4 канала, 12.5 МБ/канал
Полоса пропускания 500 МГц
Частота дискретизации 2.5 ГГц на 4 канала
Память 25 МБ (при объединении каналов)
Число каналов 4
350 МГц, 5 ГГц, 4 канала, 12.5 МБ/канал
Полоса пропускания 350 МГц
Частота дискретизации 2.5 ГГц на 4 канала
Память 25 МБ (при объединении каналов)
Число каналов 4
200 МГц, 5 ГГц, 4 канала, 12.5 МБ/канал
Полоса пропускания 200 МГц
Частота дискретизации 2.5 ГГц на 4 канала
Память 25 МБ (при объединении каналов)
Число каналов 4
Сравнить товары

Особенности

  • Высочайшее разрешение – 12 бит всегда
  • Больше возможностей – объединяет множество инструментов в одном
  • Широчайшая поддержка пробников – более 30 моделей 9 типов
  • Интерфейс MAUI с технологией OneTouch – интуитивное и эффективное взаимодействие пользователя с осциллографом

HD4096 – 12 бит всегда, в 16 раз ближе к совершенству

Осциллографы Teledyne LeCroy высокого разрешения 12 бит используют уникальную технологию HD4096, обеспечивающую бескомпромиссную эффективность измерений. Технология HD4096 предоставляет самое высокое разрешение при самом низком уровне собственных шумов во всём диапазоне измерений – 12 бит всегда и без оговорок.

Возможностей больше, чем вы могли бы себе представить

Набор опций для анализа мощности, шин последовательной передачи данных и отладки встроенных систем

  • Мультиинструментальные опции
  • Программные опции запуска и декодирования
  • Программные опции анализа спектра и мощности

Широчайшая поддержка пробников

Более 30 моделей пробников 9 типов

  • Активные пробники
  • Токовые пробники
  • Высоковольтные дифференциальные и оптоволоконные пробники
  • Адаптер интерфейса TekProbe

Интерфейс MAUI с технологией OneTouch

  • Уникальный сенсорный интерфейс, не имеющий аналогов
  • Принцип Drag-and-drop (бери-и-брось) сокращает время настройки
  • Все основные операции могут быть осуществлены в одно касание

Vertical - Analog Channels

Analog Bandwidth (Max) 200 MHz
Bandwidth 10.74"H x 14.96"W x 6.30"D (273 mm x 380 mm x 160 mm)
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 200 MHz
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 200 MHz
Rise Time (10-90%, 50 Ω) 1.75 ns
Input Channels 4
Input Channels 11.7 lbs (5.3 kg)
Vertical Resolution 12 bits; up to 15 bits with enhanced resolution (ERES)
Vertical Resolution 20.06 lbs (9.1 kg)
Effective Number of Bits (ENOB) 8.6
Vertical Noise Floor (1 mV/div) 65 uVrms
Vertical Noise Floor (2 mV/div) 65 uVrms
Vertical Noise Floor (5 mV/div) 65 uVrms
Vertical Noise Floor (10 mV/div) 69 uVrms
Vertical Noise Floor (20 mV/div) 94 uVrms
Vertical Noise Floor (50 mV/div) 162 uVrms
Vertical Noise Floor (100 mV/div) 270 uVrms
Vertical Noise Floor (200 mV/div) 963 uVrms
Vertical Noise Floor (500 mV/div) 1.63 mVrms
Vertical Noise Floor (1 V/div) 2.70 mVrms
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(0.5%) FS, offset at 0 V
Channel-Channel Isolation 60 dB
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50 Ω
±1.6 V @ 1 mV - 4.95 mV/div
±4 V @ 5 mV - 9.9 mV/div
±8 V @ 10 mV - 19.8 mV/div
±10 V @ 20 mV - 1 V/div

1 MΩ
±1.6 V @ 1 mV - 4.95 mV/div
±4 V @ 5 mV - 9.9 mV/div
±8 V @ 10 mV - 19.8 mV/div
±16 V @ 20 mV - 100 mV/div
±80 V @ 102 mV - 198 mV/div
±160 V @ 200 mV - 1 V/div
±400 V @ 1.02 V - 10 V/div
DC Vertical Offset Accuracy ±(1.0% of offset setting + 0.5% FS + 0.02% of max offset + 1mV)
Maximum Input Voltage 50 Ω: 5 Vrms,
1 MΩ: 400 V max
(DC + Peak AC ≤ 10 kHz)
Input Coupling 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Input Impedance 50 Ω ± 2.0% or 1 MΩ || 15 pF
Bandwidth Limiters 20 MHz
Rescaling Electrical: volts, amps
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Average, Sequence
Time/Division Range 500 ps/div - 100 s/div
Roll Mode available at ≥ 50 ms/div
Clock Accuracy +/-2.5ppm + 1.0ppm/year from calibration
Channel-Channel Deskew Range < 5us/div, ± 100 ns, each channel
≥ 5us/div, ± (Tdiv x 0.04), each channel
 

Acquisition - Analog Channels

Sample Rate CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
Maximum Acquisition Memory 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
Sample Rate (Single-shot) 5 GS/s on 2 Ch
2.5 GS/s on 4 Ch
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
12.5M / 25M
(1,000)
Intersegment Time 1 µs
Enhanced Resolution (ERES) From 12.5 to 15 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16 Digital channels (with WS4KHD-MSO option)
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 12.5 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) 200MHz
Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling DC, AC, HFRej, LFRej
Pre-trigger Delay 0-100% of memory size
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s or from 1 to 100,000,000
Trigger and Interpolator Jitter ≤ 8 psrms (typical)
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Maximum Trigger Rate ≤ 175,000 waveforms/second
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.9 division: DC - 10 MHz
1 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
minimum width 2 ns, Maximum Width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time.
Triggers with Exclusion Technology Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Math Tools

Math Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Math Operators - Basic Math Delay (from trigger, 50%), Duty Cycle, Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Math Operators - Digital (incl. with MSO models/options) Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Math Operators - Filters Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
Math Operators - Functions Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Other Average (summed), Average (continuous), Difference (-), Envelope, Floor, Invert (negate), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
 

Pass/Fail Testing

Pass/Fail Testing Enhanced resolution (to 15 bits vertical)
 

Three-phase Electrical and Mechanical Motor Drive Analysis Software

Setup Capability FFT (power spectrum, magnitude), up to 500 kpts record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Numerics Measurement Table Selections Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
Per-cycle "Synthesized" Waveforms and Statistics Trend (datalog) of up to 1000 measurement parameters
Harmonics Calculation Option (MDA800-HARMONICS) Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Integrated Second Display

Size Color 12.1" widescreen capacitive touch screen
Resolution 1200 x 800
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Types Auto, Single,X-Y, Single+X-Y
Number of Channels Sample dots joined, or sample dots only
 

High Speed Digitizer Output (Option)

Type Variable saturation levels; stores each trace’s persistence data in memory
Transfer Rate Select analog or color
Output Protocol Activate persistence on all traces
Control Protocol Select from 1.00 s to infinity
 

Calibration

Auto Calibration Display up to 8 Zooms
Calibration Stability 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored on the internal microSD card or external USB device, limited only by the data storage media capacity
 

Processor/CPU

Type Store to the internal microSD, over the network, or to a USB-connected peripheral device.
Processor Memory Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Operating System Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
Oscilloscope Operating Software Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Real Time Clock Calibration ensured within +/-5°C operating temperature. Manual calibration may be invoked if outside this temperature range.
 

Connectivity

Ethernet Port TI AM5728 Sitara Processor
USB Host Ports 2 GB
USB Device Port Microsoft Windows CE
GPIB Port (optional) Teledyne LeCroy MAUI™
External Monitor Port Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
Remote Control Supports 10/100BaseT Ethernet interface (RJ45 port)
Network Communication Standard 2 side USB 2.0 ports, 2 front USB 3.1 Gen 1 ports
LSIB Port (optional) 1 port - USBTMC over USB 2.0
Serial Port Supports IEEE - 488.2 (External)
Peripheral Bus 1 x HDMI, supports up to 1280x800
 

Auxiliary Input

Signal Types Via Windows Automation, or via LeCroy Remote Command Set
Coupling VXI-11 or VICP, LXI Compatible
 

Auxiliary Output

Control Signals Select External Trigger on the rear panel
Connector Type 50 Ω: DC; 1 MΩ: DC
 

Probes

Probes 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
Probe System Always Trig Out
Scale Factors 3.3 V into 1 MΩ pulse > 1.3 ms
Calibration Output Trigger out
 

Power Requirements

Voltage BNC, located on back
Nominal Power Consumption Qty. (4) ÷10 Passive Probes
Max. Power Consumption ProBus. Automatically detects and supports a variety of compatible probes
 

Environmental

Temperature (Operating) Automatically or manually selected depending on probe used
Temperature (Non-Operating) Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
Humidity (Operating) 100-240 VAC ±10% at 50-60 ±10% Hz; 110-120 VAC ±10% at 400 ±5% Hz; Automatic AC Voltage Selection
Altitude (Operating) 150 VA
Altitude (Non-Operating) 0 °C to 50 °C
Random Vibration (Operating) -30 °C to 70 °C
Random Vibration (Non-Operating) 5% to 90% relative humidity (non-condensing) up to ≤ +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +50 °C.
Functional Shock 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
 

Size and Weight

Dimensions (HWD) Up to 10,000 ft. (3048 m) at or below +30 °C
Weight Up to 40,000 ft. (12,192 m)

Канал вертикального отклонения

Полоса пропускания 200 МГц
Число каналов 4
Вертикальное разрешение 12 бит

Miscellaneous

WS4KHD-RACK
WaveSurfer 4000HD Rackmount kit
WS4KHD-SOFTCASE
WaveSurfer 4000HD Softcase

Other Software Options

WS4KHD-FG
Function Generator for WaveSurfer 4000HD

Serial Trigger and Decode

WS4KHD-EMB TD
Embedded SW bundle (I2C, SPI, UART/RS232) for WaveSurfer 4000HD
WS4KHD-AUTO TD
Automotive SW bundle (CAN, CAN FD, LIN & FlexRay) for WaveSurfer 4000HD
WS4KHD-AUDIO TD
AudioBus trigger and decode option for WaveSurfer 4000HD

Power Analysis Software

WS4KHD-PWR
Power Analysis Option for WaveSurfer 4000HD

Mixed Signal Solutions

WS4KHD-MSO-LICENSE
MSO License for WaveSurfer 4000HD (MSO Probe Not Included)

Mixed Signal Option

WS4KHD-MSO
Mixed Signal Option for WaveSurfer 4000HD (includes probe, accessories, and license)

Высоковольтные дифференциальные пробники

HVD3206A-6M
2kV, 80 MHz High Voltage Differential Probe with 6m cable and Auto Zero Disconnect
HVD3605A
6kV, 100 MHz High Voltage Differential Probe with Auto Zero Disconnect
HVD3102A-NOACC
1kV, 25 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect
HVD3206A
2kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect
HVD3106А-6M
Высоковольтный дифференциальный пробник с 6 метровым кабелем, 1кВ, 80 MГц с функцией автоустановки нуля
HVD3106А-NOACC
Высоковольтный дифференциальный пробник без наконечника, 1кВ, 120 MГц с функцией автоустановки нуля
HVD3106А
Высоковольтный дифференциальный пробник, 1кВ, 120 МГц с функцией автоустановки нуля

Высоковольтный пробник с гальванической развязкой

HVFO100-10X-TIP-U
HVFO103 +/-10V (10x) Tip Acc'y
HVFO-6M-FIBER
HVFO6m Optical Cable Acc'y
HVFO-2M-FIBER
HVFO 2m Optical Cable Acc'y
HVFO-1M-FIBER
HVFO 1m Optical Cable Acc'y
HVFO103-XMITTER
HVFO103 Spare Amp/Mod. Xmitter
HVFO100-40X-TIP-U
HVFO103 +/-40V (40x) Tip Acc'y
HVFO100-20X-TIP-U
HVFO103 +/-20V (20x) Tip Acc'y
HVFO100-5X-TIP-U
HVFO103 +/-5V (2x) Tip Acc'y
HVFO100-1X-TIP-U
HVFO103 +/-1V (1x) Tip Acc'y
HVFO103
High Voltage Fiber Optic Probe, 60 MHz Bandwidth. Includes soft-carrying case. Requires attenuating tip (ordered separately). Includes Qty. 1 1m Fiber Optic Cable

Токовые пробники

DCS025
Deskew Calibration Source for CP030, CP030A, CP031, CP031A, AP015, CP150, CP500

Пассивные пробники

PP026-1
500 MHz Passive Probe, 5mm, 10:1, 10 MOhm
PP019-1
250 MHz Passive Probe for WaveSurfer3000, 10:1, 10 MOhm

Высоковольтные пассивные пробники

PPE6KV
Высоковольтный пробник , 1000:1 400 МГц, 5 MOм/50 MOм
PPE5KV
Высоковольтный пробник , 100:1 400 MГц 50 MOм
PPE4KV
Высоковольтный пробник ,100:1 400 МГц , 50 MOм
HVP120
Высоковольтный пассивный пробник 1 Вскз , 400 МГц

Высокоомные активные пробники

ZS1500
Активный пробник, 1.5 ГГц, 0,9 пФ, 1 MOм
ZS1000
1 GHz, 0.9 pF, 1 MOhm Active Voltage Probe

Дифференциальные пробники (<= 1.5 ГГц)

ZD500
Активный дифференциальный пробник 500 MГц, 1,0 пФ, ±8 V
ZD200
Активный дифференциальный пробник, 200 МГц, 3,5 пФ, 1 МОм, ±20 В
ZD1500
Активный дифференциальный пробник, 1,5 ГГц, 1.0 пФ, ±8 V
ZD1000
Активный дифференциальный пробник, 1 ГГц, 1,0 пФ, ±8 В

Активный пробник для анализа мощности систем

RP4000-BROWSER
RP4030 350 MHz Browser Tip accessory. Includes 0 Ohm (1x), 450 Ohm (10x) and 950 Ohm (20x) tips.
RP4030
Power/Voltage Rail Probe. 4 GHz bandwidth, 1.2x attenuation, +/-30V offset, +/-800mV

Адаптер для пробников

TPA10
ProBus Probe Adapter for TekProbe-BNC Probes
Цена: 10 621 USD
Поверка 5000 руб.
Гарантия 12 месяцев
Госреестр №78095-20 до 27.04.2025 г.