USB2bus TDME
The USB2 Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers (T) and transparent color-coded decode overlays, protocol tables, and search capabilities (D). The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
ARINC429bus DSymbolic
The ARINC 429 Decode (D) option provides Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities.
ARINC429bus DME Symbolic
The ARINC 429 Decode (D) and Decode, Measure/Graph and Eye Diagram (DME) options both provide Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities. Measure/Graph (M) provides automated protocol-specific bus performance, timing, and digital data extraction measurements and waveforms. Eye Diagram (E) provides one button eye diagram creation from the physical layer signal, various eye measurements and pass/fail indications/debug.
AudioBus - I2S
Teledyne LeCroy’s Serial AudioBus trigger, decode, and graph package provides all the tools needed to properly analyze and debug digital audio buses. Teledyne LeCroy’s solution addresses the I2S, LJ, RJ, and TDM variations of the audio bus standard.
MDIO Decode
The Media Data Input/Output (MDIO) decoder provides a fast and easy way to understand and correlate MDIO bus traffic to the management of PHYs or physical layer devices in media access controllers (MACs).
10-Gigabit Ethernet Decode
The 10-Gigabit Ethernet decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the 10-Gigabit physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope. It also aids in debugging problems that are not solely analog or digital in nature - issues not evident with a Protocol Analyzer
14GBIT-80B-SYMBOL-TD
Rapidly pinpoint and debug problems with NRZ, 8b/10b and 64b/66b signals using the high-speed serial trigger and decode options. Hardware trigger products with maximum bitrates of 6.5 and 14.1 Gbps are available for WaveMaster 8 Zi-A, LabMaster 9 Zi-A and LabMaster 10 Zi series oscilloscopes, and include 8b/10b and 64b/66b decoders.
1553 TD
The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
1553 TDME
The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
64b/66b Symbol Decode
64b/66b Symbol Decode provides protocol awareness to your oscilloscope physical layer tool
8B10B
8b10b Decode Option
8b10b WR6Zi
8b10b WR6Zi Decode Option
Automotive Bundle Trigger and Decode
The Automotive Bundle Trigger and Decode is offered for selected oscilloscope product lines only. In all supported product lines, it contains the capabilities included in CANbus TD and LINbus TD, and some oscilloscope product lines also support FlexRaybus TD as well (reference oscilloscope product lines for complete support). For more information on this product, please see the product pages for CANbus TD, LINbus TD, and FlexRaybus TD.
CAN FDbus TD
The CAN FD Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities for both CAN and CAN FD.
CAN FDbus TDME
The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CAN FDbus TDME Symbolic
The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic support (TDME Symbolic) provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CANbus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
CANbus TDME
The CAN Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug.
CANbus TDME Symbolic
The CAN Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic CAN support (TDME Symbolic) provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value
D-PHYbus D - Decode option
The MIPI D-PHY decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
D-PHYbus DP - Decode and Physical layer test option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
DigRF 3G bus
The DigRF 3G decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF 3G decode adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
DigRF v4 bus
The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
Embedded System Bundle TD
The Embedded Bundle Trigger and Decode (TD) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TD products. For more information on this product, please see the product pages for I2Cbus TD, SPIbus TD, and UART-RS232bus TD.
Embedded System Bundle TDME
The Embedded Bundle Trigger, Decode, Measure/Graph and Eye Diagram(TDME) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TDME products. For more information on this product, please see the product pages for I2Cbus TDME, SPIbus TDME, and UART-RS232bus TDME.
Ethernet Decode
Ethernet Decode Ethernet decoding provides protocol awareness to the oscilloscope for fast debugging.
Fibre Channel Decode
The FCbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1, 2, 4, or 8GFC (1.0625 Gb/s to 8.5 Gb/s) Fibre Channel physical layer signals.
FlexRaybus TD
The FlexRay Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
FlexRaybus TDMP
The FlexRay Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDMP) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDMP option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Physical Layer and Eye Diagram (P) capability for advanced physical layer signal assessment and debug.
HSPT
Option for 4-6 GHz Oscilloscopes & Disk Drive Analyzers
I2Cbus TD
The I2C Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
I2Cbus TDME
The I2C Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph capability with automated measurement and graphing tools, and Eye Diagram capability for physical layer signal assessment and debug.
LINbus TD
The LIN Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
LINbus TDME
The LIN Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
M-PHYbus D - Decode option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHYbus DP - Decode and Physical layer test option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
Manchester Decode
Manchester coding is a line code in which the encoding of each data bit has at least one transition and 1s and 0s have equal bit width and therefore has no DC component. Manchester signals are self-clocking, which means that a clock signal can be recovered from the encoded data. Manchester Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using Manchester encoding scheme.
NRZbus D
NRZ (non-return-to-zero) line code is a binary code in which 1s are represented by one significant condition (usually a positive voltage) and 0s are represented by some other significant condition (usually a negative voltage), with no other neutral or rest condition. NRZ Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using NRZ encoding scheme.
PCIe Decode
The PCIEbus D option provides comprehensive PCI Express Gen1.x protocol decode for most efficient debug.
ProtoSync
The ProtoSync option further leverages the supported Teledyne LeCroy decode annotation options (PCIEbus D, USB3bus D, USB2bus D, USB2 HSICbus D, SATAbus D, SASbus D, FCbus D) installed on the oscilloscope.
SAS bus D
The SASbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1.5, 3, 6, or 12 Gb/s SAS physical layer signals. Decode information is annotated on the physical layer waveform. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic.
SATA Trigger and Decode
The SATAbus TD option provides comprehensive SATA 1.5 and 3 Gb/s protocol triggering in a WaveRunner 6 Zi oscilloscope using a true hardware protocol trigger for most efficient debug.
SENTbus D
High-resolution SENT sensor and ECU message frames are intuitively decoded on the waveform, provided in an interactive table, and payload content search tools make debugging fast and effective.
SpaceWirebus D
The SpaceWire decode adds a unique set of tools to your Teledyne LeCroy oscilloscope that simplifies the design, debug, and maintenance of SpaceWire systems. The high speed SpaceWire data stream is annotated directly on the physical layer waveforms. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic. The decoder provides an interactive table, search, and zoom to make debugging fast and effective.
SPIbus TD
The SPI Trigger solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SPIbus TDME
The SPI Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
SPMI Decode
The MIPI System Power Management Interface (SPMI) decoder provides a fast and easy way to understand and correlate SPMI bus traffic to DC power rails and power management IC (PMIC) operations in mobile, handheld, and battery-powered embedded systems.
UART-RS232bus TD
The UART and RS-232 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
UART-RS232bus TDME
The UART and RS-232 Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
UNIPRObus D
The MIPI UniPro Protocol Decoder analyzes acquired M-PHY analog waveforms and provides insight into multiple levels of UniPro protocol information. Data and Control frames are presented in an intuitive table format, where selecting a frame expands its content to a color-coded symbolic level, simultaneously creating a zoom. Decode annotation information is displayed on the physical layer waveform for a quick reference.
USB 3.0 bus
The USB 3.0 decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the USB 3.0 physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope and verify that the link is alive and transmitting properly. It also aids in debugging problems that are not solely analog or digital in nature, such as interoperability issues, uncertain error causes, and physical layer issues not evident with a Protocol Analyzer.
USB2-HSICbus D
The comprehensive and intuitive deocde and easy to navigate table display enable a powerful toolset to quickly debug a USB 2.0 HSIC powered system. Combine it with ProtoSync to get a full view of all the USB 2.0 layers.
USB2bus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
USB2bus TDME
The USB2 Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers (T) and transparent color-coded decode overlays, protocol tables, and search capabilities (D). The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
WPHD-1553 TD
MIL-STD-1553 Trigger and Decode Option for WavePro HD
WPHD-1553 TDME
MIL-STD-1553 Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-8B10B D
8b10b Decode Option for WavePro HD
WPHD-ARINC429BUS DME SYMBOLIC
ARINC 429 Bus Symbolic Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-ARINC429BUS D SYMBOLIC
ARINC 429 Bus Symbolic Decode option for for WavePro HD
WPHD-Audiobus TD
AudioBus trigger and decode for WavePro HD
WPHD-Audiobus TDG
AudioBus trigger, decode, and graph for WavePro HD
WPHD-CAN FDBUS TD
CAN and CAN FD Trigger and Decode Option for WavePro HD
WPHD-CAN FDBUS TDME
CAN and CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-CAN FDBUS TDME SYMBOLIC
CAN/CAN FD Symbolic Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-CANBUS TD
CAN Trigger & Decode Option for WavePro HD
WPHD-CANBUS TDME
CAN Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-CANBUS TDME SYMBOLIC
CAN Symbolic Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-DigRF3Gbus D
DigRF 3G Bus Decode option for WavePro HD
WPHD-DigRFV4bus D
DigRF V4 Bus Decode option for WavePro HD
WPHD-DPHYbus D
D-PHY Bus Decode option for WavePro HD
WPHD-DPHYbus DP
MIPI D-PHY CSI-2, DSI Bus Decode and Physical Layer test option for WavePro HD
WPHD-EMB TD
Bundle: Includes I2C, SPI, UART-RS232 Trigger and Decode Options for WavePro HD
WPHD-EMB TDME
Bundle: Incl. I2C, SPI, UART-RS232 Trig, Decode, Measure/Graph, and Eye Diagram Opt for WavePro HD
WPHD-ENETbus D
ENET Bus Decode Option for WavePro HD
WPHD-FCbus D
FibreChannel decode annotation option for WavePro HD
WPHD-FLEXRAYBUS TD
FlexRay Trigger and Decode Option for WavePro HD
WPHD-FLEXRAYBUS TDMP
FlexRay Trigger, Decode, Measure/Graph and Physical Layer Option for WavePro HD
WPHD-I2CBUS TD
I2C Trigger and Decode Option for WavePro HD
WPHD-I2CBUS TDME
I2C Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-LINBUS TD
LIN Trigger and Decode Option for for WavePro HD
WPHD-LINBUS TDME
LIN Trigger, Decode, Measure/Graph, and Eye Diagram Option for for WavePro HD
WPHD-MANCHESTERbus D
Manchester Bus Decode Option for WavePro HD
WPHD-MDIOBUS D
MDIO Decode for WavePro HD
WPHD-MPHYbus D
MIPI M-PHY Bus Decode option for WavePro HD
WPHD-MPHYbus DP
MIPI M-PHY Bus Decode and Physical Layer test option for WavePro HD
WPHD-NRZbus D
NRZ Bus Decode Option for WavePro HD
WPHD-PCIebus D
PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro HD
WPHD-PROTOBUS MAG
Serial Debug Toolkit - Measure Analyze Graph for WavePro HD
WPHD-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro HD
WPHD-ProtoSync-BT
Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro HD
WPHD-SASbus D
SAS Decode annotation option for WavePro HD
WPHD-SATAbus D
SATA Decode option for WavePro HD
WPHD-SENTbus D
SENT Bus Decode Option for WavePro HD
WPHD-SPACEWIREbus D
SpaceWire Decode Option for WavePro HD
WPHD-SPIBUS TD
SPI Trigger and Decode Option for for WavePro HD
WPHD-SPIBUS TDME
SPI Trigger, Decode, Measure/Graph, and Eye Diagram Option for for WavePro HD
WPHD-SPMIbus D
SPMI Decode for WavePro HD
WPHD-UART-RS232BUS TD
UART-RS232 Trigger and Decode Option for for WavePro HD
WPHD-UART-RS232BUS TDME
UART-RS232 Trigger, Decode, Measure/Graph, and Eye Diagram Option for for WavePro HD
WPHD-UNIPRObus D
MIPI UniPro Protocol Decoder Software Option for WavePro HD
WPHD-UPG-MPHY-UNIPRObus D
MPHY to UniPro Decoder Software Upgrade MPHY REQUIRED
WPHD-USB2BUS D
USB 2.0 Decode Option for WavePro HD
WPHD-USB2BUS DME
USB 2.0 Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-USB2-HSICbus D
USB 2.0 HSIC Decode Option for WavePro HD
WPHD-USB3BUS D
USB 3.0 Decode option for WavePro HD
T3DSO2000-TD
Программная опция декодирования сигналов I2C, SPI, UART/RS232, CAN, LIN.
Key Features
- Supports USB 2.0 Low, Full, or High speeds (1.x and 2.0)
- Trigger on USB packet types:
- Token
- Data
- Handshake
- User-defined
- Transaction triggering support
- Comprehensive Protocol Error and Bus Event triggering
- Comprehensive Search by Events, Packets, Transactions or Errors
- Intuitive, color-coded decode overlays
- Interactive protocol table with zoom and pattern search
- Automated timing measurements
- Serial digital data extraction to an analog value (serial DAC) with waveform graphs
- Eye Diagrams with failure location
The Most Comprehensive USB Trigger ("T")
Full support is provided for triggering on any type of Packet, even User-Defined Packets, with complete flexibility for address, endpoint, split type, hub, port, etc. Trigger on specific Data payloads in specific locations. OR any three Packets in a single trigger condition. Create a USB Transaction trigger with any allowed combination of Token, Data, Handshake, and User-Defined packets. Advanced capability like this is usually only found in a dedicated protocol analyzer!
Search and Zoom ("D")
The powerful search engine of the USB 1.x/2.0 decode package can quickly find an Event, Packet, Transaction, or Protocol Error. Search through a long record of decoded data by entering any of the 45 available search criteria by entering a value or simply finding the next occurrence. For example, search through a long record to find a glitch that is frequently occurring after each EOP.
Intuitive, Color-coded Decode Overlays ("D")
A transparent overlay with color-coding for specific portions of each protocol and the entire message frame makes it easy to understand your serial data information. Unlike other solutions, with protocol decode information away from the signal, our solution correlates the waveform and the protocol decode directly on the display. As the acquisition length is expanded or shortened, the decode overlay will adjust to show you just the right amount of information.
Interactive Table Summarizes Results ("D")
Turn the oscilloscope into a protocol analyzer with a tabular display of decoded information. Customize the table to show only the data of interest and touch a message in the table to automatically zoom to it and display it on the screen. Export the table for offline analysis. Up to four different decoded signals of any type may be simultaneously displayed in the table.
Measure/Graph Tools for Validation Efficiency ("M")
Quickly validate cause and effect with automated timing measurements to or from an analog signal or another serial message. Make multiple measurements in a single long acquisition to quickly acquire statistics during corner-case testing. Serial (digital) data can be extracted to an analog value and graphed to monitor system performance over time, as if it was probed directly. Complete validation faster and gain better insight.
Eye Diagrams ("E")
Rapidly display an eye diagram of your packetized low-speed serial data signal without additional setup time. Use eye parameters to quantify system performance and apply a standard or custom mask to identify anomalies. Mask failures can be indicated and can force the scope into Stop mode.