PCI/PCI-X Hot Swap Extenders
PCIBX32-3
PCIBX32-5
PCIBX64-3
PCIBX64-5
TAB2LP-3
TAB2LP-5
- 32 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#
- Control +3.3Vaux power
- On-board 3.3V source, 3 Amps
- Board select jumper for multiple boards operation, 2 boards per system
- PCI-X support
- Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
- Short circuit protection
- Power may be controlled via Mechanical Switch or Software Control
- Recommend accessories
- PCIMINI-3 - 32 bit Connector saver
- PCIMINI-5 - 32 bit Connector saver and converter to 5V key
- PCIMINI64-3 - 64 bit Connector Saver
- PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes
PCIBX32-5
- 32 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#
- Control +3.3Vaux power
- On-board 3.3V source, 3 Amps
- Board select jumper for multiple boards operation, 2 boards per system
- PCI-X support
- Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
- Short circuit protection
- Power may be controlled via Mechanical Switch or Software Control
- Recommend accessories
- PCIMINI-3 - 32 bit Connector saver
- PCIMINI-5 - 32 bit Connector saver and converter to 5V key
- PCIMINI64-3 - 64 bit Connector Saver
- PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes
PCIBX64-3
- 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#, 32/64 Bit Operation
- Control +3.3Vaux power
- On-board 3.3V source, 3 Amps
- Board select jumper for multiple boards operation, 2 boards per system
- PCI-X support
- Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
- Short circuit protection
- Power may be controlled via Mechanical Switch or Software Control
- Recommend accessories
- PCIMINI64-3 - 64 bit Connector Saver
- PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes
PCIBX64-5
- 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#, 32/64 Bit Operation
- Control +3.3Vaux power
- On-board 3.3V source, 3 Amps
- Board select jumper for multiple boards operation, 2 boards per system
- PCI-X support
- Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
- Short circuit protection
- Power may be controlled via Mechanical Switch or Software Control
- Recommend accessories
- PCIMINI64-3 - 64 bit Connector Saver
- PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes
TAB2LP-3
- 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#, 32/64 Bit Operation
- Control +3.3VAux power
- Board select jumper for multiple boards operation, 2 boards per system.
- PCI-X support
- Short circuit protection
- Power may be controlled via Mechanical Switch (on Interface board) or Software Control
- Recommend accessories
- PCIMINI64-3 - 64 bit Connector Saver
- PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes
TAB2LP-5
- 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
- 3.3V<=>5V Signal Level Conversion
- Software programmable via parallel port to:
- Control Power on/off
- Detect for properly inserted UUT cards
- Read bus frequency
- Read Voltages and Current draw by UUT
- Program RST# duration
- Program +5V turn on slew rate
- Read status of RST, M66EN, PME#, 32/64 Bit Operation
- Control +3.3VAux power
- Board select jumper for multiple boards operation, 2 boards per system.
- PCI-X support
- Short circuit protection
- Power may be controlled via Mechanical Switch or Software Control
- Recommend accessories
- PCIMINI64-3 - 64 bit Connector Saver and converter to 3.3V key
- PCIMINI64-5 - 64 bit Connector Saver
- 3x25P - Parallel Port Cable for controlling up to 2 extender cards
- Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes