Продукция

HVD3102А

HVD3102А

Высоковольтный дифференциальный пробник, 1кВ, 25 МГц с функцией автоустановки нуля

HVD3102А Высоковольтный дифференциальный пробник, 1кВ, 25 МГц с функцией автоустановки нуля
HVD3102А-NOACC Высоковольтный дифференциальный пробник без наконечника, 1кВ, 25 МГц с функцией автоустановки нуля
HVD3106А Высоковольтный дифференциальный пробник, 1кВ, 120 МГц с функцией автоустановки нуля
HVD3106А-NOACC Высоковольтный дифференциальный пробник без наконечника, 1кВ, 120 MГц с функцией автоустановки нуля
HVD3106А-6M Высоковольтный дифференциальный пробник с 6 метровым кабелем, 1кВ, 80 MГц с функцией автоустановки нуля
HVD3206А Высоковольтный дифференциальный пробник, 2кВ, 120 MГц с функцией автоустановки нуля
HVD3206А-6M Высоковольтный дифференциальный пробник, 2кВ, 120 MГц с функцией автоустановки нуля
HVD3605А Высоковольтный дифференциальный пробник, 6 кВ, 100 MГц с функцией автоустановки нуля
AP031 Высоковольтный дифференциальный пробник (÷10, ÷100), 700 В, 25 MГц
ADP300 Высоковольтный дифференциальный пробник, 1 кВ, 400 В, 20 МГц
ADP305 Высоковольтный дифференциальный пробник 1 кВ, 400 В, 100 MГц

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Device Under Test Recommended Model Safety Class Bandwidth Cable Length Tip Accessories Included
120 V/240 V Half-Bridge Circuit Topologies HVD3102A 1 kV 25 MHz 2 m Yes
HVD3102A-NOACC 1 kV 25 MHz 2 m No
HVD3106A 1 kV 120 MHz 2 m Yes
HVD3106A-NOACC 1 kV 120 MHz 2 m No
380 V - 600 V Class Electrical Apparatus HVD3106A 1 kV 120 MHz 2 m Yes
HVD3106A-NOACC 1 kV 120 MHz 2 m No
HVD3106A-6M 1 kV 80 MHz 6 m Yes
Solar PV Inverter HVD3106A 1 kV 120 MHz 2 m Yes
HVD3206A 1.5 kV 120 MHz 2 m Yes
HVD3206A-6M 1.5 kV 80 MHz 6 m Yes
5 kV Electrical Apparatus HVD3605A 6 kV 100 MHz 6 m Yes

Key Features

  • 1 kV, 2 kV, 6 kV CAT safety rated models
  • Widest differential voltage ranges available
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC and DC coupling
  • ProBus active probe interface with automatic scaling
  • AutoZero with auto disconnect switch
  • Wide oscilloscope compatibility

Exceptional Common-Mode Rejection Ratio

The CMRR for the probes is exceptional out to very high frequencies, greatly improving measurement capability in the noisy, high common-mode environments found in power electronics. The high CMRR combined with low probe noise and high offset capability provides superior measurement capabilities compared to other HV differential probes.

High Precision Measurements

HVD3000A series probes provide 1% gain accuracy enabling precise voltage measurements. AutoZero capability ensures further measurement precision by allowing small offset drifts to be calibrated out of the measurement. This feature can be applied without removing the HVD3000A leads from the device under test.

Widest Application Coverage

The HVD3000A series cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV class electrical apparatus. Each model has the best available gain accuracy, widest differential and offset voltage range, and superior CMRR.

1500 Vdc CAT III Rating

The HVD3206A supports 1500 Vdc solar photovoltaic (PV) measurements per the IEC/EN 61010- 031:2015 standard. It has a 1500 Vdc CAT III and a 2000 V (DC+peakAC) CAT I rating.

Complete Probe Integration

The ProBus interface provides power and communication to the probe eliminating the need for a separate power supply or batteries. Attenuation is automatically selected based on oscilloscope gain range (V/div) setting.

Main Specifications

Bandwidth 25 MHz
Input Coupling DC only
Input Impedance 10 MΩ || 2.5 pF (between inputs)
5 MΩ || 5.0 pF (either input to ground)
Attenuation 100x / 1000x
Rise Time
(10-90%)
14 ns
Differential Voltage Range (High Attenuation) 1500 V (DC + peak AC) from 7 to 500 V/div with up to 1500V offset.
2000 V maximum typical measurable differential voltage before saturation
Differential Voltage Range (Low Attenuation) 27.6 V (DC + peak AC) from 100 mV/div to 6.9 V/div with up to 150V offset.
Common Mode Voltage Range ±1500 V (DC + peak AC), 1000 Vrms (CAT III) (either input to ground)
Maximum Input Voltage to Earth ±2000 Vpk (nominal, either input to ground)
Max Safe Input 1000 Vrms CAT III
per IEC/EN 61010-031/A1:2008
Sensitivity 100 mV/div to 6.9V/div (100X)
7V/div to 500V/div (1000X)
Gain Accuracy 1% (LF, guaranteed)
Slew Rate 100 V/ns (maximum)
Output Coupling AC or DC coupling
Output Termination 1 MΩ
Interface ProBus
Input Lead Length 40 cm input lead length
Cable Length (input lead to oscilloscope connection) 2.25 m
 

Noise and Rejection

CMRR (Typical) DC - 60 Hz: 85 dB
1 MHz: 65 dB
5 MHz: 40 dB
20 MHz: 30 dB
Noise (Probe) 100X: <15 mVrms
1000X: <85mVrms
(referred to input)
 

Environmental and Safety

Temperature (Operating) 0°C to 50°C
Temperature (Non-Operating) -40°C to 70°C
Humidity (Operating) 5% to 80% RH (Non-Condensing) up to 30°C, decreasing linearly to 45% RH at 50°C
Humidity (Non-Operating) 5% to 95% RH (Non-Condensing), 75% RH above 30°C, 45% RH above 40°C
Altitude (Operating) 3,000 m maximum
When used with clip accessories, 2000 m maximum
Altitude (Non-Operating) 10,000 m
Pollution Degree 2, Indoor use only
WaveSurfer 3000R
Узнать больше
WaveSurfer 510R
Узнать больше
WaveRunner 8000R
Узнать больше
MDA800A Motor Drive Analyzers
Узнать больше
HDO9000R / HDO9000R-MS
Узнать больше
WaveMaster / SDA 8 Zi-B-R
Узнать больше