Продукция

CP031A

CP031A

Высокочувствительный токовый пробник до 30 A, 100 МГц


CP030 Токовый пробник до 30 A, 50 МГц
CP030A Высокочувствительный токовый пробник до 30 A, 50 МГц
CP031 Токовый пробник до 30 A, 100 МГц
CP031A Высокочувствительный токовый пробник до 30 A, 100 МГц
CP150 Токовый пробник до 150 А, максимум 500 A < 30 мкс, 10 МГц
CP500 Токовый пробник до 500 А, 2 МГц
CA10 Programmable ProBus Current Adapter
CA10-QUADPAK Programmable ProBus Current Adapter
DCS015 Deskew Calibration Source for AP015
CP030-3M 30 A, 10 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 3 meter cable
CP150-6M 150 A, 5 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 6 meter cable
DCS025 Deskew Calibration Source for CP030, CP030A, CP031, CP031A, AP015, CP150, CP500

Current Probes

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

  • CP030 - 30A, 50MHz Current Probe
  • CP030A - 30A, 50MHz High Sensitivity Current Probe
  • CP031 - 30A, 100MHz Current Probe
  • CP031A - 30A, 100MHz High Sensitivity Current Probe
  • CP150 - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse
  • CP500 - 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse
  • DCS015 - Deskew Calibration Source for CP031,CP031A, CP030, CP030A and AP015

Current Sensor Adapter

ca10-01_sm.png

The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. The easy to use interface provides the ability for the CA10 to be programmed to contain the specifications of the current sensor allowing it to automatically correct for the gain or attenuation and display results in Ampere units. This allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.

  • CA10 - Programmable ProBus Current Sensor Adapter for use with third party current sensors
  • CA10-QUADPAK - Set of 4 CA10, Programmable ProBus Current Sensor Adapter for use with third party current sensors


Wide Range of Applications

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

High Sensitivity

The CP030A and CP031A provide a high sensitivity of 1mA/div. This allows for more precise low current measurements on Teledyne LeCroy oscilloscopes. When used with HDO high definition oscilloscopes with HD4096 technology, users will obtain highly accurate, low current waveforms with unmatched 12-bit resolution for improved debug and analysis.

Fully Integrated

All Teledyne LeCroy current probes are powered through the Teledyne LeCroy ProBus connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for the Degauss and Autozero functions to be done directly from the oscilloscope’s user interface.

Deskew Calibration Source

The DSC015 deskew calibration source has both voltage and current time-aligned signals, which enables the precise deskew of voltage and current probes. Most voltage probes along with the CP030, CP030A, CP031, and CP031A are compatible with the DSC015.

Model Max Continuous Input Current Max Peak Current Bandwidth Minimum Sensitivity Coupling Max Conductor Size (diameter) Interface
CP030 30A 50A 50 MHZ 10mA/div AC, DC, GND 5mm Probus, 1MΩ only
CP030A 30A 50A 50 MHZ 1mA/div AC, DC, GND 5mm Probus, 1MΩ only
CP031 30A 50A 100 MHZ 10mA/div AC, DC, GND 5mm Probus, 1MΩ only
CP031A 30A 50A 100 MHZ 1mA/div AC, DC, GND 5mm Probus, 1MΩ only
AP015 30A 50 A 50 MHz 10 mA/div AC, DC, GND 5 mm Probus, 1MΩ only
CP150 150 A 500 A 10 MHz 100 mA/div AC, DC, GND 20 mm Probus, 1MΩ only
CP500 500 A 700 A 2 MHz 100 mA/div AC, DC, GND 20 mm Probus, 1MΩ only

Electrical Characteristics

Bandwidth (Probe Only) 100 MHz
Coupling AC 1 MΩ, DC 1MΩ, GND
Risetime (typical) 3.5 ns
Max Continuous Input Current 30 A
Max Peak Current
(non-continous)
50 A
Minimum Sensitivity 1 mA/div
Amplitude Accuracy ±1% of reading to 30 A
±2% of reading to 50 A
Maximum Circuit Voltage 300 V, CAT I
(Insulated Wire)
 

Environmental and Safety

Operating Temperature 0 °C to 40 °C
Humidity ≤ 80 % relative humidity
(non-condensing) 
Storage Temperature -10 °C to 50 °C
Max Altitude 2000 m
 

Physical Dimensions

Probe Head Dimensions (L x W x H) 175 mm x 18 mm x 40 mm
Cable Length 1.5 m
Maximum Conductor Size 5 mm
Weight 260 g
 

General Characteristics

Interface ProBus
WaveJet Touch R
Узнать больше
WaveSurfer 510R
Узнать больше
WaveRunner 8000R
Узнать больше
MDA800A Motor Drive Analyzers
Узнать больше
HDO9000R / HDO9000R-MS
Узнать больше
WaveMaster / SDA 8 Zi-B-R
Узнать больше