Data Storage Software
WPHD-DDM2
Disk Drive Measurements Software Package for WavePro HD
WPHD-DDA
Disk drive analyzer software package for WavePro HD
WPHD-AORM
Advanced Optical Recording Measurement Package for WavePro HD
Miscellaneous
Other Software Options
WPHD-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WavePro HD
WPHD-ET-PMT
Electrical Telecom Pulse Mask Test Package for WavePro HD
WPHD-EMC
EMC Pulse Parameter Software Package for WavePro HD
Serial Data Analysis
WPHD-SDM
Serial Data Mask Software Package for WavePro HD
WPHD-EYEDRII
Signal Integrity Toolkit - Channel & Fixture De-embedding/Emulation, Tx/Rx Equalization
WPHD-SDAIII-COMPLETELINQ
Multi-Lane SDA LinQ incl. Eye, Jitter, Noise, Xtalk Meas, EyeDrII & VirtualProbe for WavePro HD
Serial Data Compliance
QPHY-USB
The USB package provides a complete acquisition and analysis system for USB 2.0 devices, hosts, and hubs, as specified in the USB-IF USB 2.0 Electrical Test Specification. The test software implements a full set of electrical tests for USB 2.0, including High-, Full-, and Low-speed tests and is supported by Teledyne LeCroy’s QualiPHY automated test and reporting software.
QPHY-PCIE
The Teledyne LeCroy QPHY-PCIe Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing the entire transmitter physical layer tests as described by the Card Electro-mechanical specification Rev 1.1 and 2.0
QPHY-MOST50
The Teledyne LeCroy QPHY-MOST50 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST50 will perform all electrical compliance tests as defined in the MOST Electrical Physical Layer Specification Rev. 1.1.
QPHY-MOST150
The Teledyne LeCroy QPHY-MOST150 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST150 will perform all electrical compliance tests as defined in the MOST150 oPHY Automotive Physical Layer Sub-Specification Rev. 1.1 and MOST150 cPHY Automotive Physical Layer Sub-Specification Rev 1.0.
QPHY-MIPI-DPHY - D-PHY Compliance Package
Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for D-PHY version 1.00.00
QPHY-LPDDR2
The Teledyne LeCroy QPHY-LPDDR2 Test Solution is the best way to characterize LPDDR2 memory interfaces. Capable of performing measurements on 466 MHz, 533 MHz, 667 MHz, 800 MHz, 900 Mhz, 1066 MHz and custom speed grades, QPHY-LPDDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specifications.
QPHY-ENET
Ethernet testing compliant with IEEE 802.3-2005 requires many test setups and connections and mask tests. Using Teledyne LeCroy QualiPHY-ENET these measurements are easy to setup and complete. Instructive connection diagrams and message boxes appear as pop ups on the oscilloscope screen. The connection diagram instructs the user how to change test fixture and jumper pins in order to do complete test. When the tests are complete, QualiPHY will generate a test report in PDF, HTML, or XML formats. Jitter and pulse mask tests are performed with automatic waveform alignment, and all test results feature pass/fail indicators corresponding to the standard being tested.
QPHY-DDR3
The Teledyne LeCroy QPHY-DDR3 Test Solution is the best way to characterize DDR3, DDR3L, and LPDDR3 memory interfaces. Capable of performing measurements on 800 MT/s, 1066 MT/s, 1333 MT/s, 1600 MT/s, 1866 MT/s, 2133 MT/s and custom speed grades, QPHY-DDR3 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification.
QPHY-DDR2
The Teledyne LeCroy QPHY-DDR2 Test Solution is the best way to characterize DDR2 memory interfaces. Capable of performing measurements on 400 MHz, 533 MHz, 667 MHz, 800 MHz, 1066 MHz and custom speed grades, QPHY-DDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specification and Intel JEDEC Specifications Addendums.
GRL-USB-PD-C1
GRL-USB-PD-C1 is a flexible test controller, designed for USB-PD Compliance testing of the Unit Under Test (UUT) and more.
GRL-USB-PD
GRL-USB-PD software provides a simple and efficient way to perform USB-PD electrical parametric and protocol measurements. GRL-USB-PD provides waveform visibility and protocol analysis making it ideal for design and debug of USB Type-C Power Delivery silicon and end products.
QPHY-BROADR-REACH
Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future. QPHY-BroadR-Reach automates testing and validation of 100 Mb/s Automotive Ethernet, which is described in both the BroadR-Reach and 100Base-T1 (IEEE 802.3bw) specifications.
Digital Filtering Software
WPHD-DFP2
Digital Filter Software Package for WavePro HD
Jitter Analysis Software
WPHD-JITKIT
Clock, clock-data Jitter Analysis and views of time, statistical, spectral, and jitter overlay
Serial Trigger and Decode
WPHD-USB2BUS DME
USB 2.0 Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-SPIBUS TDME
SPI Trigger, Decode, Measure/Graph, and Eye Diagram Option for for WavePro HD
WPHD-ProtoSync-BT
Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro HD
WPHD-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro HD
WPHD-PCIebus D
PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro HD
WPHD-MPHYbus DP
MIPI M-PHY Bus Decode and Physical Layer test option for WavePro HD
WPHD-LINBUS TDME
LIN Trigger, Decode, Measure/Graph, and Eye Diagram Option for for WavePro HD
WPHD-I2CBUS TDME
I2C Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-FLEXRAYBUS TDMP
FlexRay Trigger, Decode, Measure/Graph and Physical Layer Option for WavePro HD
WPHD-FCbus D
FibreChannel decode annotation option for WavePro HD
WPHD-EMB TDME
Bundle: Incl. I2C, SPI, UART-RS232 Trig, Decode, Measure/Graph, and Eye Diagram Opt for WavePro HD
WPHD-EMB TD
Bundle: Includes I2C, SPI, UART-RS232 Trigger and Decode Options for WavePro HD
WPHD-DPHYbus DP
MIPI D-PHY CSI-2, DSI Bus Decode and Physical Layer test option for WavePro HD
WPHD-CANBUS TDME
CAN Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-CAN FDBUS TDME
CAN and CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-1553 TDME
MIL-STD-1553 Trigger, Decode, Measure/Graph, and Eye Diagram Option for WavePro HD
WPHD-1553 TD
MIL-STD-1553 Trigger and Decode Option for WavePro HD
Power Analysis Software
WPHD-PWR
Power Analysis Option for WavePro HD
Serial Data Test Fixtures
TF-ENET-B
10/100/1000BaseT Ethernet Test Fixture
TF-USB-B
USB 2.0 Compliance Test Fixture
Computer Upgrade
WPHD-RSSD-02
Additional Standard Solid State Drive for WavePro HD
Memory Options
WPHD-5000MPT
5 Gpt/2ch (2.5 Gpt/4ch) Memory Option for WavePro HD
WPHD-2000MPT
2 Gpt/2ch (1 Gpt/4ch) Memory Option for WavePro HD
WPHD-1000MPT
1000 Mpt/2ch (500 Mpt/4ch) Memory Option for WavePro HD
WPHD-500MPT
500 Mpt/2ch (250 Mpt/4ch) Memory Option for WavePro HD
WPHD-200MPT
200 Mpt/2ch (100 Mpt/4ch) Memory Option for WavePro HD
Remote Control/Network Options
USB2-GPIB
External USB 2.0 to GPIB IEEE 488.2 adapter