Продукция

LabMaster 10 Zi-A-R (65 ГГц)

LabMaster 10 Zi-A-R (65 ГГц)

Полоса пропускания  65 ГГц, 4  канала, частота дискретизации до 160 ГГц

Полоса пропускания 20 ГГц, 4 канала, память: 32 МБ, частота дискретизации до 80 ГГц
Полоса пропускания 20 ГГЦ
Частота дискретизации 80 ГГц
Память 512 МБ
Число каналов 4
Полоса пропускания 25 ГГц, 4 канала, частота дискретизации до 80 ГГц
Полоса пропускания 25 ГГЦ
Частота дискретизации 80 ГГц
Память 512 МБ
Число каналов 4
Полоса пропускания 30 ГГц, 4 канала, частота дискретизации до 80 ГГц
Полоса пропускания 30 ГГЦ
Частота дискретизации 80 ГГц
Память 512 МБ
Число каналов 4
Полоса пропускания 36 ГГц, 4 канала, частота дискретизации до 80 ГГц
Полоса пропускания 36 ГГЦ
Частота дискретизации 80 ГГц
Память 512 МБ
Число каналов 4
Полоса пропускания 50 ГГц, 4 канала, частота дискретизации до 160 ГГц
Полоса пропускания 50 ГГЦ
Частота дискретизации 160 ГГц
Память 1024 МБ
Число каналов Up to 40, depending on configuration selected. Up to 80 @ 36 GHz.
Полоса пропускания 59 ГГц, 4 канала, частота дискретизации до 160 ГГц
Полоса пропускания 59 ГГЦ
Частота дискретизации 160 ГГц
Память 1024 МБ
Число каналов Up to 40, depending on configuration selected. Up to 80 @ 36 GHz.
Полоса пропускания 65 ГГц, 4 канала, частота дискретизации до 160 ГГц
Полоса пропускания 65 ГГЦ
Частота дискретизации 160 ГГц
Память 1024 МБ
Число каналов Up to 40, depending on configuration selected. Up to 80 @ 36 GHz.
Полоса пропускания 100 ГГц, 4 канала, частота дискретизации до 240 ГГц
Полоса пропускания 100 ГГц
Частота дискретизации 160 ГГц
Память 1536 МБ
Число каналов Up to 20, depending on configuration selected. Up to 80 @ 36 GHz.
Сравнить товары

The Ultimate in High Bandwidth Performance

Up to 100 GHz
Up to 80 Channels @ 36 GHz
Up to 240 GS/s
Up to 1536 Mpts/Ch
50 fs rms Sample Clock (Intrinsic) Jitter
Jitter Between All Channels of <130 fs rms

LabMaster 10 Zi modular systems re-define oscilloscope performance and capabilities.

  • Multi-channel operation at the highest bandwidths
    • 20 channels @ 100 GHz
    • 40 channels @ 65, 60 or 50 GHz
    • 80 channels @ 36, 30, or 25 GHz
  • Bandwidth and channel upgrade flexibility
  • ChannelSync for precise synchronization of all acquisition modules
    • <130 fs rms Jitter Between All Channels
  • Server-class CPU w/ 32 GB RAM standard
  • Ultra-high stability sample clock, Jitter <50 fs rms
  • 3.5 ps (20-80%) rise time
  • 14.1 Gb/s hardware serial trigger

Multi-Lane Serial Data Analysis with SDAIII-CompleteLinQ

Compare eye, jitter and noise measurements on up to 4 lanes, simultaneously. Gain a complete understanding of sources of jitter and noise with a the industry's most complete serial data analysis package

Optical Modulation Analysis with Optical-LinQ & IQScope-RT

Make undistorted measurements with up to 70 GHz of coherent optical receiver bandwidth with the Coherent Solutions IQScope-RT and LabMaster 10-65Zi-a oscilloscope. Use the Optical-LinQ software for  for complete constellation analysis and OMA measurements such as EVM.

New PAM4 Measurements Package

Analyze PAM4 signals, measuring eye, jitter and noise parameters for all eye openings on PAM4 signals.

Канал вертикального отклонения

Полоса пропускания 65 ГГЦ
Аналоговая полоса пропускания 50 Ом (-3 дБ) (ProBus вход) Analog Bandwidth @ 50 Ω (-3 dB) (1.85mm Inputs): 65 ГГЦ (≥10 мВ/дел)
Аналоговая полоса пропускания 1 МОм (-3 дБ) (ProBus вход) Analog Bandwidth @ 50 Ω (-3 dB) (2.4/2.92mm Inputs): 36 GHz (≥5 мВ/дел)
Время нарастания (10-90%, 50 Ом) 6,5 пс
Время нарастания (20-80%, 50 Ом) 4,9 пс
Число каналов Up to 40, depending on configuration selected. Up to 80 @ 36 GHz.
Ограничение полосы пропускания For ≤ 36 GHz Mode: 1, 3, 4, 6, 8, 13, 16, 20, 25, 30, 33 GHz. For > 36 GHz Mode: 50 GHz.
Входной импеданс 2.92mm Inputs: 50 Ω+/-2% 1.85mm Inputs: 50 Ω+/-2%
Входное соединение 2.92 mm Inputs: 50 Ω: DC, GND 1.85 mm Inputs: 50 Ω: DC
Максимальное входное напряжение 2.92 mm Inputs: ±2 Vmax@<76mV/div, 5.5Vrms@≥76mV/div 1.85 mm Inputs: ±2 Vmax@≤80mV/div
Вертикальное разрешение 8 бит
Чувствительность 50 Ω (2.92mm): 5 mV-500mV/div, fully variable (5-9.9 mV/div via zoom) 50 Ω (1.85mm): 10 mV-80mV/div, fully variable. Higher gain settings possible through use of external attenuators.
Погрешность установки коэффициента усиления 10 ps/div-256 s/div (maximum capture time is based on minimum sample rate of 200kS/s and installed memory).

Канал горизонтального отклонения

Опорный генератор (ОГ) Internal timebase with 10 GHz clock frequency common to all input channels. Single, distributed 10 GHz clock for all channels ensures precise synchronization with timing accuracy between all channels identical to that provided within a single, conventional oscilloscope package.
Временной сдвиг между каналами 10 ps/div-256 s/div (maximum capture time is based on minimum sample rate of 200kS/s and installed memory).
Погрешность ОГ <0.1 ppm + (aging of 0.05 ppm/yr from last calibration)

Система сбора данных

Частота дискретизации 80 ГГц 4 канала, 160 ГГц 2 канала
Эквивалентная частота дискретизации ПП > 36 ГГц: 160 ГГц/канал (2 канала) ПП ≤ 36 ГГц: 80 ГГц/канал (4 канала)
Максимальная скорость захвата осциллограмм 1 000 000 осциллограмм/сек (сегментированный режим)
Максимальный объем памяти 1024 МБ/канал (2 канала)
Память ПП > 36 ГГц: 64 МБ/кан (3500 сегментов) ПП ≤ 36 ГГц: 32 МБ/кан (3500 сегментов)

Обработка сигнала

Программное увеличение разрешения (ERES) 8 бит (до 11 бит в режиме эквивалентного увеличенного разрешения, ERes)
Интерполяция Линейная, Sin x/x

Система синхронизации

Режимы запуска развертки Автоматический, ждущий, однократный, остановка
Источники синхросигнала Any Ch 1-4 (Edge, Window, SMART, Cascade triggers), AUX, internal Fast Edge; or any input channel (Edge trigger only) on additional 10-xxZi-A Acquisition Modules (Channels 5 and higher). Slope and level unique to each source except line trigger.
Вид входа DC, AC, HFREJ, LFREJ
Предзапуск 0 – 100 % от полной длинны памяти
Послезапуск 0 – 10,000 делений в режиме реального времени

Виды синхронизации

Стандартные виды синхронизации По фронту, по параметрам окна, по глитчу, по ранту, по интервалам, по скорости нарастания, по подтвержденному первому, по качеству, каскадная, по длительности импульса, отложенная, по логической последовательности, по результатам измерений, по последовательному протоколу до 14,1 Гбит/с (опция)
Опциональные виды синхронизации Не доступно

Дисплей

Тип Цветной, 15,3״ TFT сенсорный экран, Отображение до 40 осциллограмм одновременно. Возможно подключение дополнительного дисплея
Разрешение WXGA 1280 х 768 точек.

Процессор

Процессор вид Intel® Xeon™ X5660 2,8 ГГц
Процессор оперативная память ОЗУ 32 ГБ (опция до 192 ГБ)
Процессор операционная система ОС Microsoft Windows® 7 Professional Edition (64-бит),

Интерфейсы

Дистанционное управление По средствам Windows Automation, LeCroy Remote Command Set
Поддержка сетевых протоколов VXI-11 или VICP, LXI класс C (v1.2)
GPIB Опционально
Ethernet Port 1
USB (Host) LabMaster MCM-Zi -A Master Control Module: minimum 2 total USB 2.0 ports on rear of unit to support Windows compatible devices LabMaster MCM-Zi -A Master Control Module: minimum 3 total USB 2.0 ports on front of unit to support Windows compatible devices
Порт для подлкючения внешнего монитора Dual Link DVI compatible to support internal display on MCM-Zi Master Control Module (1280 x 768 pixel resolution) and customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution using extended desktop mode.

Пробники

Напряжение 100-240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection, Installation Category II
Максимальное потребляемое напряжение LabMaster 10-xxZi-A Acquisition Module - 1225 W / 1225 VA. LabMaster MCM-Zi-A Master Control Module - 450 W / 450 VA. Each Module and the CPU has a separate power cord.
Размер (ВхШхГ) 355 × 467 × 406 мм
Вес LabMaster 10-Zi-A-модуля Acquisition -24,1 кг LabMaster MCM-Zi-A Модуль управления Master - 21,4 кг
Гарантия и сервисное обслуживание 3 года гарантии, калибровка рекомендуется ежегодно. Специальные программы предполагают расширенную гарантию и калибровку

Memory Options

LM10Zi-VL-256
256 Mpt/Ch Memory Option for LabMaster 10 Zi Acquisition Modules

High Speed Output Accessories

LSIB-2
High speed PCIe Gen1 x4 digitizer output for LabMaster MCM-Zi Master Control Module. Half-heightcard with bracket.
LSIB-HOSTBOARD
PCI Express x4 Host Interface Board for desktop PC

Miscellaneous

KYBD-1
Keyboard
Rise-Time-Filter-100ps
Low-Pass Rise Time Filter 100 ps
Rise-Time-Filter-150ps
Low-Pass Rise Time Filter 150 ps
OC910
Deluxe LabMaster Mobile Cart
LM10Zi-ACQMOD-SOFTCA
Soft Carrying Case for 10-xxZi

Mixed Signal Accessories

HDA-DLS-09QL
9 channel QuickLink leadset for HDA125
HDA-DLS-18QL
18 channel QuickLink leadset for HDA125

Remote Control/Network Options

GPIB-3
GPIB Option for LabMaster MCM-Zi

Labmaster ChannelSync Mainframe Hub

LabMaster CMH-1ACQMODULE-Zi
Expansion ChannelSync module card for ChannelSync Mainframe Hub
LabMaster CMH20-Zi -
ChannelSync Mainframe Hub to permit LabMaster expansion to up to 20 acquisition modules. Also requires one LabMaster CHM-1ACQMODULE-Zi card for each acquisition module to be connected.

Computer Upgrade

MCMZi-32-UPG-192GB
Upgrade from 32 GB to 192 GB CPU RAM at time of initial shipment
MCMZi-32-UPG-128GB
Upgrade from 32 GB to 128 GB CPU RAM at time of initial shipment
MCMZi-32-UPG-64GB
Upgrade from 32 GB to 64 GB CPU RAM at time of initial shipment
MCMZi-500GB-RHD-02
Additional 500 GB Hard Drive for MCM-Zi

LabMaster Acquisition Modules

LabMaster 10-100Zi-A
100 GHz, 240 GS/s, 96 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input. Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode. or, 65 GHz, 160 GS/s, 1ch, 64 Mpts/Ch w/ 2 ch at 36 GHz
LabMaster 10-65Zi-A
65 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input. Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-59Zi-A
59 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-50Zi-A
50 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-36Zi-A
36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Slave Acquisition Module, 50 Ohm Input
LabMaster 10-30Zi-A
30 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input
LabMaster 10-25Zi-A
25 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input
LabMaster 10-20Zi-A
20 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input

Serial Data Test Fixtures

TF-USB3
SuperSpeed and SuperSpeedPlus USB Test Fixtures
TF-10GBASE-T
Test Fixture for 10GBase-T
TF-MIPI-MPHY-DUALPAK
MIPI M-PHY input offset adapter dual pack
TF-SATA-C-Kit
SATA Compliance Test Kit
TF-HDMI-3.3V-QUADPAK
HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter

Serial Trigger Hardware

LM10Zi-14GBIT-80B-SYMBOL-TD
80-bit NRZ, 8b/10b, and 64b/66b 14.1 Gbps Serial Trigger option for LabMaster 10 Zi

Mixed Signal Solutions

HDA125-09-SYNC
12.5 GS/s High-speed Digital Analyzer with 9ch QuickLink leadset and SYNC connection
HDA125-18-SYNC
12.5 GS/s High-speed Digital Analyzer with 18ch QuickLink leadset and SYNC connection

Data Storage Software

DDM2
Disk Drive Analyzer Software Package
DDA
Disk Drive Analyzer Software Package
AORM
Advanced Optical Recording Measurements

Other Software Options

VectorLinQ VSA Package
Signal Analysis (VSA) options provide an extensive toolset for demodulation and analysis of RF and IQ modulated signals. These tools provide deep insight into advanced signal types with maximum measurement flexibility and sophisticated signal visualization. The intuitive user interface is easy to set up and allows for user customization to meet the needs of even the most complex signals.
Spectrum Analyzer Option
Spectrum analyzer style user interface with controls for start/stop frequency or center frequency and span. Utilize up to 20 markers to automatically identify harmonics and quickly analyze frequency content. Monitor how the spectrum changes over time by viewing the spectrogram in 2D or 3D.
Optical-LinQ
The world leading OpticalLinQ software for analysis of optically modulated signals can now be used with any coherent optical receiver (including the Teledyne LeCroy IQS series of receivers). Users can select a wide variety of analysis views and parametric measurements to gain a complete understanding of their optical signal path.
EMC
Understanding an electronic design's susceptibility to Electronmagnetic (EM) discharge is an important element of validation. Whether fast one time event transients or repetitive bursts EM can introduce unexpected events in the circuit performance. Teledyne LeCroy Oscilloscopes offer high sample rates and measurements tailored specifically to this task. Whether one pulse or billions of measurements engineers gain insight into their device and system suseptibility.

Serial Data Analysis

VirtualProbe
By using VirtualProbe, you can understand the characteristics of signals where a physical probe cannot be placed, such as inside of a package or at the end of an interconnect that doesn't physically exist. You can choose to remove effects caused by elements such as fixtures that are not be present in a production configuration, and also add the effects of a device that is to be included but for which only an S-parameter model exists. Use in conjunction with SDAIII products to complete your serial data analysis solution set.
SDM
Serial Data Mask Package
PAM4
PAM4 signaling represents a new step in the evolution of serial data signal formats, overcoming some fundamental limitations of traditional NRZ signaling. But with new signal types come new measurement needs. Teledyne LeCroy’s PAM4 analysis package meets these needs by leveraging industry-leading eye, jitter and noise analysis capabilities to perform eye, jitter and noise analysis of PAM4 signals.
Eye Doctor II
Eye Doctor II provides the channel emulation and de-embedding tools that engineers need for the next generation of serial data standards
CBL-DE-EMBED
Remove cable effects from your measurements
SDAIII-CompleteLinQ
signaling, designers of serial data systems require multi-lane analysis. Unleash the power of multi-lane SDA analysis to perform eye and jitter measurements on up to four lanes, simultaneously.

Serial Data Compliance

QPHY-MIPI-MPHY
The QPHY-MIPI-MPHY Test Solution provides automated control of Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for M-PHY version 3.0.
QPHY-HDMI2
automated and easy-to-use solution for HDMI transmitter testing in accordance with Version 2.0 of the HDMI Compliance Test Specification (including testing for version 1.4 devices).
QPHY-eDP
QPHY-eDP provides a highly automated and easy-to-use solution for Embedded DisplayPort source testing in accordance with version 1.4 of the VESA Embedded DisplayPort PHY compliance test guideline.
QPHY-DisplayPort
The QPHY-DisplayPort software option provides an automated test environment for running all of the normative real-time oscilloscope tests for sources in accordance with Version 1.2b of the Video Electronics Standards Association (VESA) DisplayPort PHY Compliance Test Specification, as well as tests for HBR3 signals at 8.1 Gbps.
QPHY-DDR4
DDR4 is an evolutionary upgrade from DDR3. It introduces data transfer rates which are nearly double the DDR3 transfer rates, ranging from 1.6 GT/s up to 3.2 GT/s. DDR4's higher transfer rates and lower operating voltage have driven new test methodologies and test requirements which were not previously required for DDR3 in order to ensure proper signal fidelity. QPHY-DDR4 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification which will aid in DDR4 design validation.
QPHY-DDR3
The Teledyne LeCroy QPHY-DDR3 Test Solution is the best way to characterize DDR3, DDR3L, and LPDDR3 memory interfaces. Capable of performing measurements on 800 MT/s, 1066 MT/s, 1333 MT/s, 1600 MT/s, 1866 MT/s, 2133 MT/s and custom speed grades, QPHY-DDR3 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification.
QPHY-10GBASE-T
QPHY-10GBASE-T automated compliance test software performs electrical compliance testing of the Physical Media Attachment (PMA) for 10GBASE-T Ethernet PHY, based on IEEE802.3-2008 requirements.
QPHY-10GBase-KR
The Teledyne LeCroy QPHY-10GBase-KR solution automates testing for 10Gigabite Ethernet Copper Backplane base on the IEEE 802.3ap specifications. The test framework simplifies the test setup and execution of generic and common test requirements such as jitter separation, rise/fall time and transmitter equalization parameters. The guided wizard prompts the user to for specification required patterns and takes the measurements accordingly. The test report includes the test results pass/fail summary, margins and limits, as well as waveforms and measurements used during the test process.
DDR Debug Toolkit
The DDR Debug Toolkit provides test, debug and analysis tools for the entire DDR design cycle. The unique DDR analysis capabilities provide automatic Read and Write burst separation, bursted data jitter analysis and DDR-specific measurement parameters.

Digital Filtering Software

DFP2
Digital Fiter Package

Jitter Analysis Software

JITKIT
Validating system jitter performance and analyzing systems with high jitter levels comprises a significant portion of a system engineer's test and validation time. JITKIT makes it simple and easy to understand the basic system jitter performance of clock signals and clock-data activities, including period, half period, cyclecycle, skew, amplitude, differential voltage crossing, slew rate, and a wide variety of other common jitter measurements.

Power Analysis Software

Power Analyzer Package
Automatically and accurately analyze the performance of switched-mode power circuits

Serial Trigger and Decode

USB2bus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
USB 3.0 bus
The USB 3.0 decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the USB 3.0 physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope and verify that the link is alive and transmitting properly. It also aids in debugging problems that are not solely analog or digital in nature, such as interoperability issues, uncertain error causes, and physical layer issues not evident with a Protocol Analyzer.
UNIPRObus D
The MIPI UniPro Protocol Decoder analyzes acquired M-PHY analog waveforms and provides insight into multiple levels of UniPro protocol information. Data and Control frames are presented in an intuitive table format, where selecting a frame expands its content to a color-coded symbolic level, simultaneously creating a zoom. Decode annotation information is displayed on the physical layer waveform for a quick reference.
UART-RS232bus TD
The UART and RS-232 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SPMI Decode
The MIPI System Power Management Interface (SPMI) decoder provides a fast and easy way to understand and correlate SPMI bus traffic to DC power rails and power management IC (PMIC) operations in mobile, handheld, and battery-powered embedded systems.
SPIbus TD
The SPI Trigger solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SpaceWirebus D
The SpaceWire decode adds a unique set of tools to your Teledyne LeCroy oscilloscope that simplifies the design, debug, and maintenance of SpaceWire systems. The high speed SpaceWire data stream is annotated directly on the physical layer waveforms. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic. The decoder provides an interactive table, search, and zoom to make debugging fast and effective.
SATA Trigger and Decode
The SATAbus TD option provides comprehensive SATA 1.5 and 3 Gb/s protocol triggering in a WaveRunner 6 Zi oscilloscope using a true hardware protocol trigger for most efficient debug.
SAS bus D
The SASbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1.5, 3, 6, or 12 Gb/s SAS physical layer signals. Decode information is annotated on the physical layer waveform. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic.
ProtoSync
The ProtoSync option further leverages the supported Teledyne LeCroy decode annotation options (PCIEbus D, USB3bus D, USB2bus D, USB2 HSICbus D, SATAbus D, SASbus D, FCbus D) installed on the oscilloscope.
PCIe Decode
The PCIEbus D option provides comprehensive PCI Express Gen1.x protocol decode for most efficient debug.
Manchester Decode
Manchester coding is a line code in which the encoding of each data bit has at least one transition and 1s and 0s have equal bit width and therefore has no DC component. Manchester signals are self-clocking, which means that a clock signal can be recovered from the encoded data. Manchester Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using Manchester encoding scheme.
M-PHYbus D - Decode option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
LINbus TD
The LIN Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
I2Cbus TD
The I2C Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
FlexRaybus TD
The FlexRay Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
Fibre Channel Decode
The FCbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1, 2, 4, or 8GFC (1.0625 Gb/s to 8.5 Gb/s) Fibre Channel physical layer signals.
Ethernet Decode
Ethernet Decode Ethernet decoding provides protocol awareness to the oscilloscope for fast debugging.
DigRF v4 bus
The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
DigRF 3G bus
The DigRF 3G decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF 3G decode adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
D-PHYbus DP - Decode and Physical layer test option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
D-PHYbus D - Decode option
The MIPI D-PHY decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
CAN FDbus TD
The CAN FD Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities for both CAN and CAN FD.
8B10B
8b10b Decode Option
64b/66b Symbol Decode
64b/66b Symbol Decode provides protocol awareness to your oscilloscope physical layer tool
1553 TD
The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
10-Gigabit Ethernet Decode
The 10-Gigabit Ethernet decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the 10-Gigabit physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope. It also aids in debugging problems that are not solely analog or digital in nature - issues not evident with a Protocol Analyzer
MDIO Decode
The Media Data Input/Output (MDIO) decoder provides a fast and easy way to understand and correlate MDIO bus traffic to the management of PHYs or physical layer devices in media access controllers (MACs).
AudioBus - I2S
Teledyne LeCroy’s Serial AudioBus trigger, decode, and graph package provides all the tools needed to properly analyze and debug digital audio buses. Teledyne LeCroy’s solution addresses the I2S, LJ, RJ, and TDM variations of the audio bus standard.
ARINC429bus DSymbolic
The ARINC 429 Decode (D) option provides Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities.

MDIO Decode

6GBIT-80B-SYMBOL-TD
Rapidly pinpoint and debug problems with NRZ, 8b/10b and 64b/66b signals using the high-speed serial trigger and decode options. Hardware trigger products with maximum bitrates of 6.5 and 14.1 Gbps are available for WaveMaster 8 Zi-A, LabMaster 9 Zi-A and LabMaster 10 Zi series oscilloscopes, and include 8b/10b and 64b/66b decoders.

Probe Parts and Kits

L2.92A-PBUS
2.92mm to ProBus Probe Adapter
L2.92A-PLINK
2.92mm to ProLink Probe Adapter
OE695G-REFCAL
OE695G Reference Cal (1ch)

Дифференциальные пробники (13-25 ГГц)

D1305-A
WaveLink D1305 13 GHz/1.6Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
D2505-A-CCNIST
NIST Calibration for D2505-A. Includes test data.
D1605-A-CCNIST
NIST Calibration for D1605-A. Includes test data.
D1305-A-CCNIST
NIST Calibration for D1305-A. Includes test data.
DXX05-SI
Replacement Dxx05-SI 13-25 GHz Solder-In Lead with Qty. 5 Spare Resistors. For warranted accuracy, amplifier must be returned to factory for calibration with this lead.
Dxx05-PT-KIT
WaveLink Dxx05-PT (22 GHz rating) Adjustable Positioner Tip Kit. For use with Dxx05 amplifiers.
WL-2.92MM-CASE
WaveLink 2.92mm Platform/Cable Assembly Kit for D2505-A 25 GHz WaveLink Probes.
D2505-A
WaveLink D2505 25 GHz/2.4Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
D2005-A
WaveLink D2005 20 GHz/2.4Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
D1605-A
WaveLink D1605 16 GHz/2.4Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
D2505-A-PS
25 GHz Complete Probe System with Solder-In Tip (25 GHz) and Positioner Tip Browser (22 GHz)
D2005-A-PS
20 GHz Complete Probe System with Solder-In Tip (20 GHz) and Positioner Tip Browser (20 GHz)
D1605-A-PS
16 GHz Complete Probe System with Solder-In Tip (16 GHz) and Positioner Tip Browser (16 GHz)
D1305-A-PS
13 GHz Complete Probe System with Solder-In Tip (13 GHz) and Positioner Tip Browser (13 GHz)

Serial Data Compliance

QPHY-DisplayPort
The QPHY-DisplayPort software option provides an automated test environment for running all of the normative real-time oscilloscope tests for sources in accordance with Version 1.2b of the Video Electronics Standards Association (VESA) DisplayPort PHY Compliance Test Specification, as well as tests for HBR3 signals at 8.1 Gbps.

Serial Trigger and Decode

CANbus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.

Оптические и электрические преобразователи

OE695G
Optical to Electrical Converter
OE6250G-M
O-E converter, 25 GHz Bessel-Thomson response, 36 GHz flat response

Active Voltage Rail Probes

RP4000-UFL-PCBMOUNT
Qty. 10 U.FL 3mm x 3mm PCB mounts (additional to those supplied with RP4030)
RP4000-MCX-CABLE-UFL
Qty. 3 3 GHz MCX to U.FL ultra-miniature coax cable, 8cm long (add'l to those supplied with RP4030)
RP4000-MCX-PCBMOUNT
Power/Voltage Rail Probe. 4 GHz bandwidth, 1.2x attenuation, +/-30V offset, +/-800mV
RP4000-MCX-LEAD-SI
Qty. 3 MCX 4 GHz solder-in lead accessories (additional to those supplied with RP4030), 18cm long
RP4000-BROWSER
RP4030 350 MHz Browser Tip accessory. Includes 0 Ohm (1x), 450 Ohm (10x) and 950 Ohm (20x) tips.
RP4030
Power/Voltage Rail Probe. 4 GHz bandwidth, 1.2x attenuation, +/-30V offset, +/-800mV

Дифференциальные пробники (4-6 ГГц)

TF-DSQ
Probe Deskew and Calibration Test Fixture
EZ Probe
Cascade Microtech EZ-Probe Positioner

High Speed Output Accessories

LSIB-CABLE-7M
PCI Express x 4 7-meter cable with x4 cable connectors include
LSIB-CABLE-3M
PCI Express x 4 3-meter cable with x4 cable connectors included
Цена: по запросу руб.
Поверка 50 000 руб.
Гарантия 36 месяцев
Госреестр № 64558-16 до: 11.07.21 г.