Продукция

HDO9404R

HDO9404R

Полоса пропускания 4 ГГц, 4 канала, частота дискретизации 40 ГГц

Полоса пропускания 1 ГГЦ, 4 канала, частота дискретизации 40 ГГц
Полоса пропускания 1 ГГЦ
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 1 ГГЦ, 4 канала, частота дискретизации 10 ГГц
Полоса пропускания 2 ГГЦ
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 3 ГГЦ, 4 канала, частота дискретизации 40 ГГц
Полоса пропускания 3 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 4 ГГц, 4 канала, частота дискретизации 40 ГГц
Полоса пропускания 4 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 1 ГГц, число каналов: 4+16, частота дискретизации 40 ГГц
Полоса пропускания 1 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 2 ГГц, число каналов: 4+16, частота дискретизации 40 ГГц
Полоса пропускания 2 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 3 ГГц, число каналов: 4+16, частота дискретизации 40 ГГц
Полоса пропускания 3 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Полоса пропускания 4 ГГц, число каналов: 4+16, частота дискретизации 40 ГГц
Полоса пропускания 4 ГГц
Частота дискретизации до 40 ГГц
Память 128 МБ
Число каналов 4
Сравнить товары

Главные особенности

10 bit resolution; up to 13.8 bits with Optimized Filtering
1 GHz- 4 GHz bandwidths
Up to 40 GS/s sample rate
15.4" capacitive touch screen
MAUI with OneTouch
-         Designed for touch
-         Built for simplicity
-         Made to solve
Advanced Tools
-         Jitter and Timing Analysis Capabilities
-         WaveScan – Search and Find
-         LabNotebook Documentation and Report Generation
-         History Mode – Waveform Playback
Optional Software Packages
-         Advanced Customization
-         Digital Filtering
-         Spectrum Analysis
-         Device and Switching Power Supply Analysis
-         Comprehensive set of serial data analysis, debug, validation and compliance tools
16 digital channels with 1.25 GS/s
-         Analog and Digital Cross-Pattern Triggering
-         Digital Pattern Search and Find
-         Analog and Digital Timing Measurements
-         Logic Gate Emulation
-         Activity Indicators

HD1024 High Definition Technology

HD1024 high definition technology enables 10 bits of vertical resolution with 4 GHz bandwidth. The HDO9000 automatically and dynamically determines the best ADC configuration under each specific measurement condition to always provide the optimal resolution.

Dynamic ADC Reconfiguration

HD1024 technology enables dynamic reconfiguration of the ADC to achieve 10 bits of vertical resolution. By automatically determining the best ADC configuration under each specific measurement condition, the HDO9000 always provides the optimal resolution.

Optimized Filtering

HD1024 high definition technology makes use of optimized filtering to provide additional resolution beyond 10-bits; extending up to 13.8 bits. When operating in low sample rate conditions, an anti-aliasing filter is automatically applied to reduce excess out-of-band noise. Additionally, resolution can be improved by applying a manual bandwidth limit on an individual channel.

Superior User Experience

The HDO9000 and MAUI with OneTouch allows users to perform all common operations with a single touch of the display, optimizing for convenience and efficiency. Meanwhile, the 15.4” high resolution capacitive touch screen’s bright display and quick responsiveness further enhances the inherent efficiency and intuitiveness of MAUI with OneTouch.

MAUI with OneTouch

The HDO9000 and MAUI with OneTouch sets the standard for oscilloscope user experience by providing the most unique touch features on any oscilloscope. Common gestures are used to instinctively interact with the oscilloscope and dramatically reduce setup time. Convenience and efficiency are optimized - all common operations can be performed with one touch and do not require opening and closing of pop-up dialogs or menus.

Powerful, Deep Toolbox

The standard collection of math, measurement, debug, and documentation tools provides unsurpassed analysis capabilities. Application-specific packages enable streamlined debugging for common design/validation scenarios. The advanced customization option (XDEV) enables user-defined parameters and math functions providing unique and limitless analysis capability.

Exceptional Serial Data Tools

A wide a variety of application packages are available to meet all serial data test challenges, ranging from automated compliance packages to flexible debug toolkits. A suite of protocol specific measurement and eye diagram packages are available to complement the industry’s most intuitive trigger and decode packages.

Integrated Mixed Signal Capabilities

The HDO9000 High Definition Oscilloscopes offer powerful mixed signal solutions that combine high definition analog channels with the flexibility of digital inputs. The HDO9000-MS models are equipped with an integrated 16 digital channels and a 1.25 GS/s sampling rate which creates an all-in-one debug machine.

High-speed Digital Analyzer

For applications demanding even higher-performance mixed-signal acquisition capabilities, the HDA125 High-speed Digital Analyzer can be easily added to the HDO9000. With 12.5 GS/s digital sampling rate on 18 input channels and the revolutionary QuickLink probing solution, validation of challenging interfaces such as DDR memory has never been simpler or more comprehensive.

Serial Trigger, Decode, Measure/Graph, and Eye Diagrams

Isolate events using the serial bus trigger and view color-coded protocol information on top of analog or digital waveforms. Timing and bus measurements allow quick and easy characterization of a serial data system. Serial (digital) data can be extracted and graphed to monitor system performance over time. Identify physical layer anomalies with eye diagram mask testing and mask failure locator.

LabNotebook

LabNotebook automatically saves all displayed waveforms, oscilloscope setup file, and a screen with a single button press, eliminating the need to navigate multiple menus to save all these files independently. Report files can be annotated and shared with colleagues to fully document all results.

Q-Scape Multi-tab Display Architecture

Unique Q-Scape multitab display architecture speeds your understanding of your design with 4x the display area. Acquired or calculated waveforms can be located on any of four different “tabbed” oscilloscope grid displays, with individually selectable grid styles available for each tab. Quickly move waveforms to different tabs through drag-and-drop.

Jitter and Timing Analysis Option

JITKIT makes it simple and easy to understand the basic system jitter performance of clock signals and clock-data activities, including period, half period, cycle-cycle, skew, amplitude, differential voltage crossing, slew rate, and a wide variety of other common jitter measurements.

XDEV Advanced Customization Option

With the XDEV option, third party programs can be completely integrated into the oscilloscope’s processing stream. Create customized math functions and parameters using C/C++, MATLAB, Excel, JScript or Visual Basic without ever leaving the oscilloscope application - and view the results directly on the oscilloscope, in real-time.

Канал вертикального отклонения

Полоса пропускания 4 ГГц
Аналоговая полоса пропускания 50 Ом (-3 дБ) (ProBus вход) 4 ГГц (≥ 5 мВ/дел)
Аналоговая полоса пропускания 1 МОм (-3 дБ) (ProBus вход) 1 ГГц
Время нарастания (10-90%, 50 Ом) 100 пс
Время нарастания (20-80%, 50 Ом) 75 пс
Число каналов 4
Ограничение полосы пропускания 20 МГц, 200 МГц, 500 МГц, 1 ГГц, 2 ГГц, 3 ГГц
Входной импеданс 50 Ом ± 2%; 1 МОм ± 2% // 17 пФ, 10 МОм || 9.5 пФ
Входное соединение 1 МОм: открытый, закрытый, заземлено; 50 Ом: закрытый, заземлено
Максимальное входное напряжение 50 Ом: 5 Вскз ±10 Впик 1 МОм: 400 В (переменное напряжение < 10 кГц + постоянная составляющая)
Вертикальное разрешение 10 бит (до 13,8 бит в режиме оптимальной фильтрации)
Чувствительность Вход 50 Ом: 1 мВ/дел…1 В/дел // Вход 1 МОм: 1 мВ/дел…10 В/дел
Погрешность установки коэффициента усиления ± 1 % от полной шкалы (смещение 0 В)

Канал горизонтального отклонения

Опорный генератор (ОГ) Внутренний опорный генератор, общий на 4 канала; возможна работа от внешнего опорного источника, подключенного ко входу EXT
Временной сдвиг между каналами HD1024 включен: 20 пс/дел - 500 мкс/дел; HD1024 выключен: 20 пс/дел – 6,4 кс/дел; Эквивалентная дискретизация доступна при К разв. менее 10 нс/дел; Режим самописца доступен при К разв. более 100 мс/дел и дискретизации менее 5 Мвыб/с
Погрешность ОГ ± (1,5% от установленного значения + 1% от полной шкалы + 1 мВ)

Система сбора данных

Частота дискретизации 20 Гвыб/с (4 канала), 40 Гвыб/с (2 канала)
Эквивалентная частота дискретизации 200 Гвыб/с для периодических сигналов (20 пс/дел - 10 нс/дел)
Максимальная скорость захвата осциллограмм 1 000 000 осциллограмм/сек (сегментированный режим)
Максимальный объем памяти 128 МБ
Память 64 Мвыб/ 128 Мвыб на канал (15 000 сегментов)

Обработка сигнала

Интерполяция Линейная, Sin x/x (по 2 или 4 точкам); автовыбор при HD1024 вкл.

Система синхронизации

Режимы запуска развертки Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Источники синхросигнала Any input channel, Ext, Ext/10, Line, or Fast Edge; slope and level unique to each source (except line trigger)
Вид входа Открытый, закрытый, ВЧ и НЧ фильтры
Предзапуск 0 – 100 % от полной длинны памяти (шаг 1% или 100 нс)
Послезапуск 0 – 10 000 делений в режиме реального времени (ограничено на медленных развертках и и в режиме самописца)
Диапозон установки внешней синхронизации Внеш: ±400 мВ; Внеш/10: ±4 В

Виды синхронизации

Стандартные виды синхронизации По фронту, по длительности импульса, по глитчу, по размеру окна, по шаблону, по ранту, по скорости нарастания, по интервалу, отложен- ная, по результатам измерения. Условие «по результатам измерения» доступно только для события, по которому осуществляется запуск.
Опциональные виды синхронизации Не доступно
Опциональные виды синхронизации по протоколам передачи последовательных данных I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA

Дисплей

Тип 39,1 см емкостной сенсорный экран
Разрешение WXGA 1280 х 800 точек

Процессор

Процессор вид Intel Core i5 2,7 ГГц
Процессор оперативная память ОЗУ 16 ГБ
Процессор операционная система ОС Windows 7 Embedded (64-бит)

Интерфейсы

Дистанционное управление По средствам Windows Automation, LeCroy Remote Command Set
Поддержка сетевых протоколов VXI-11 или VICP, LXI класс C (v1.2)
GPIB Опционально
Ethernet Port 1
USB (Device) 1
USB (Host) 4
Порт для подлкючения внешнего монитора DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver).
Шина дополнительных устройств Teledyne LeCroy LBUS standard

Пробники

Пробники 4 пассивных пробника (÷10)
Напряжение 100…240 В ±10%, 45…66 Гц или 100…120 В ±10%, 400 Гц ±5%
Максимальное потребляемое напряжение 500 W
Размер (ВхШхГ) 358 х 445 х 242 мм
Вес 11,7 кг (19,0 в упаковке)
Гарантия и сервисное обслуживание 3 года гарантии, калибровка рекомендуется ежегодно. Специальные программы предполагают расширенную гарантию и калибровку

Токовые пробники

DCS025
Deskew Calibration Source for CP030, CP030A, CP031, CP031A, AP015, CP150, CP500

Miscellaneous

OC1024-A
Deluxe oscilloscope cart with one tiltable shelf and additional storage
OC1021-A
Basic oscilloscope cart with one tiltable shelf

Mixed Signal Accessories

HDA-DLS-09QL
9 channel QuickLink leadset for HDA125
HDA-DLS-18QL
18 channel QuickLink leadset for HDA125
MSO-DLS-36
Digital Lead Set, D18-D35
MSO-DLS-18
Digital Lead Set, D0-D17
MSO-3M
3M Interconnect Cable, D0-D17 or D18-D35
PK400-3
Small gripper probe set for 0.008'' (0.2 mm) pin pitch, includes 10 probes with color-coded leads
PK400-2
Medium gripper probe set for 0.04'' (1.0 mm) pin pitch, includes 10 probes with color-coded leads
PK400-1
Large gripper probe set for 0.10'' (2.54 mm) pin pitch, includes 10 probes with color-coded leads
PK400-0
Extra Large Gripper Probe Set . Includes 22 probes

Synchronize Oscilloscope Options

HDO9k-8CH-SYNCH
HW kit to allow for 8 channel synch capability to combine 2 HDO9000 High Definition Oscilloscopes

Computer Upgrade

HDO9K-256GB-RSSD-02
Additional 256 GB Solid State Drive for use with RSSD option.
HDO9K-256GB-RSSD
256 GB Removable Solid State Drive option for HDO9000

Serial Data Test Fixtures

TF-USB-B
USB 2.0 Compliance Test Fixture

Mixed Signal Solutions

MS-250
250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option
MS-500
500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option
HDA125-18-LBUS
12.5 GS/s High-speed Digital Analyzer with 18ch QuickLink leadset and SYNC connection

Data Storage Software

DDM2
Disk Drive Analyzer Software Package
DDA
Disk Drive Analyzer Software Package
AORM
Advanced Optical Recording Measurements

Other Software Options

XDEV
Advanced Customization Package
VBA9000 Vehicle Bus Analyzer
The VBA9000 with HD1024 Technology provides exceptional signal fidelity with 10-bit resolution, 4 GHz bandwidth and a superior oscilloscope experience to deliver faster time to insight.
Spectrum Analyzer Option
Spectrum analyzer style user interface with controls for start/stop frequency or center frequency and span. Utilize up to 20 markers to automatically identify harmonics and quickly analyze frequency content. Monitor how the spectrum changes over time by viewing the spectrogram in 2D or 3D.
EMC
Understanding an electronic design's susceptibility to Electronmagnetic (EM) discharge is an important element of validation. Whether fast one time event transients or repetitive bursts EM can introduce unexpected events in the circuit performance. Teledyne LeCroy Oscilloscopes offer high sample rates and measurements tailored specifically to this task. Whether one pulse or billions of measurements engineers gain insight into their device and system suseptibility.

Serial Data Analysis

SDM
Serial Data Mask Package
Eye Doctor II
Eye Doctor II provides the channel emulation and de-embedding tools that engineers need for the next generation of serial data standards
CBL-DE-EMBED
Remove cable effects from your measurements
SDA II
Unleash the power of serial data analysis to understand and characterize your design, prove compliance, and determine why a device or host fails compliance.

Serial Data Compliance

QPHY-USB
The USB package provides a complete acquisition and analysis system for USB 2.0 devices, hosts, and hubs, as specified in the USB-IF USB 2.0 Electrical Test Specification. The test software implements a full set of electrical tests for USB 2.0, including High-, Full-, and Low-speed tests and is supported by Teledyne LeCroy’s QualiPHY automated test and reporting software.
QPHY-MOST50
The Teledyne LeCroy QPHY-MOST50 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST50 will perform all electrical compliance tests as defined in the MOST Electrical Physical Layer Specification Rev. 1.1.
QPHY-MOST150
The Teledyne LeCroy QPHY-MOST150 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST150 will perform all electrical compliance tests as defined in the MOST150 oPHY Automotive Physical Layer Sub-Specification Rev. 1.1 and MOST150 cPHY Automotive Physical Layer Sub-Specification Rev 1.0.
QPHY-MIPI-DPHY - D-PHY Compliance Package
Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for D-PHY version 1.00.00
QPHY-LPDDR2
The Teledyne LeCroy QPHY-LPDDR2 Test Solution is the best way to characterize LPDDR2 memory interfaces. Capable of performing measurements on 466 MHz, 533 MHz, 667 MHz, 800 MHz, 900 Mhz, 1066 MHz and custom speed grades, QPHY-LPDDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specifications.
QPHY-ENET
Ethernet testing compliant with IEEE 802.3-2005 requires many test setups and connections and mask tests. Using Teledyne LeCroy QualiPHY-ENET these measurements are easy to setup and complete. Instructive connection diagrams and message boxes appear as pop ups on the oscilloscope screen. The connection diagram instructs the user how to change test fixture and jumper pins in order to do complete test. When the tests are complete, QualiPHY will generate a test report in PDF, HTML, or XML formats. Jitter and pulse mask tests are performed with automatic waveform alignment, and all test results feature pass/fail indicators corresponding to the standard being tested.
QPHY-DDR3
The Teledyne LeCroy QPHY-DDR3 Test Solution is the best way to characterize DDR3, DDR3L, and LPDDR3 memory interfaces. Capable of performing measurements on 800 MT/s, 1066 MT/s, 1333 MT/s, 1600 MT/s, 1866 MT/s, 2133 MT/s and custom speed grades, QPHY-DDR3 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification.
QPHY-DDR2
The Teledyne LeCroy QPHY-DDR2 Test Solution is the best way to characterize DDR2 memory interfaces. Capable of performing measurements on 400 MHz, 533 MHz, 667 MHz, 800 MHz, 1066 MHz and custom speed grades, QPHY-DDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specification and Intel JEDEC Specifications Addendums.
GRL-USB-PD-C1
GRL-USB-PD-C1 is a flexible test controller, designed for USB-PD Compliance testing of the Unit Under Test (UUT) and more.
GRL-USB-PD
GRL-USB-PD software provides a simple and efficient way to perform USB-PD electrical parametric and protocol measurements. GRL-USB-PD provides waveform visibility and protocol analysis making it ideal for design and debug of USB Type-C Power Delivery silicon and end products.
ET-PMT
Electrical Telecom Mask Test Package
DDR Debug Toolkit
The DDR Debug Toolkit provides test, debug and analysis tools for the entire DDR design cycle. The unique DDR analysis capabilities provide automatic Read and Write burst separation, bursted data jitter analysis and DDR-specific measurement parameters.
QPHY-BroadR-Reach
Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future. QPHY-BroadR-Reach automates testing and validation of 100 Mb/s Automotive Ethernet, which is described in both the BroadR-Reach and 100Base-T1 (IEEE 802.3bw) specifications.

Digital Filtering Software

DFP2
Digital Fiter Package

Jitter Analysis Software

JITKIT
Validating system jitter performance and analyzing systems with high jitter levels comprises a significant portion of a system engineer's test and validation time. JITKIT makes it simple and easy to understand the basic system jitter performance of clock signals and clock-data activities, including period, half period, cyclecycle, skew, amplitude, differential voltage crossing, slew rate, and a wide variety of other common jitter measurements.

Power Analysis Software

Power Analyzer Package
Automatically and accurately analyze the performance of switched-mode power circuits
Digital Power Management Software Option (DIG-PWR-MGMT)
Digital Power Management Software Option (DIG-PWR-MGMT)

Serial Trigger and Decode

USB2bus TDME
The USB2 Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers (T) and transparent color-coded decode overlays, protocol tables, and search capabilities (D). The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
USB2bus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
USB2-HSICbus D
The comprehensive and intuitive deocde and easy to navigate table display enable a powerful toolset to quickly debug a USB 2.0 HSIC powered system. Combine it with ProtoSync to get a full view of all the USB 2.0 layers.
UNIPRObus D
The MIPI UniPro Protocol Decoder analyzes acquired M-PHY analog waveforms and provides insight into multiple levels of UniPro protocol information. Data and Control frames are presented in an intuitive table format, where selecting a frame expands its content to a color-coded symbolic level, simultaneously creating a zoom. Decode annotation information is displayed on the physical layer waveform for a quick reference.
UART-RS232bus TDME
The UART and RS-232 Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
UART-RS232bus TD
The UART and RS-232 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SPMI Decode
The MIPI System Power Management Interface (SPMI) decoder provides a fast and easy way to understand and correlate SPMI bus traffic to DC power rails and power management IC (PMIC) operations in mobile, handheld, and battery-powered embedded systems.
SPIbus TDME
The SPI Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
SPIbus TD
The SPI Trigger solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SpaceWirebus D
The SpaceWire decode adds a unique set of tools to your Teledyne LeCroy oscilloscope that simplifies the design, debug, and maintenance of SpaceWire systems. The high speed SpaceWire data stream is annotated directly on the physical layer waveforms. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic. The decoder provides an interactive table, search, and zoom to make debugging fast and effective.
SATA Trigger and Decode
The SATAbus TD option provides comprehensive SATA 1.5 and 3 Gb/s protocol triggering in a WaveRunner 6 Zi oscilloscope using a true hardware protocol trigger for most efficient debug.
ProtoSync
The ProtoSync option further leverages the supported Teledyne LeCroy decode annotation options (PCIEbus D, USB3bus D, USB2bus D, USB2 HSICbus D, SATAbus D, SASbus D, FCbus D) installed on the oscilloscope.
PCIe Decode
The PCIEbus D option provides comprehensive PCI Express Gen1.x protocol decode for most efficient debug.
Manchester Decode
Manchester coding is a line code in which the encoding of each data bit has at least one transition and 1s and 0s have equal bit width and therefore has no DC component. Manchester signals are self-clocking, which means that a clock signal can be recovered from the encoded data. Manchester Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using Manchester encoding scheme.
M-PHYbus DP - Decode and Physical layer test option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHYbus D - Decode option
The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
LINbus TDME
The LIN Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
LINbus TD
The LIN Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
I2Cbus TDME
The I2C Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph capability with automated measurement and graphing tools, and Eye Diagram capability for physical layer signal assessment and debug.
I2Cbus TD
The I2C Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
FlexRaybus TDMP
The FlexRay Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDMP) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDMP option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Physical Layer and Eye Diagram (P) capability for advanced physical layer signal assessment and debug.
FlexRaybus TD
The FlexRay Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
Fibre Channel Decode
The FCbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1, 2, 4, or 8GFC (1.0625 Gb/s to 8.5 Gb/s) Fibre Channel physical layer signals.
Ethernet Decode
Ethernet Decode Ethernet decoding provides protocol awareness to the oscilloscope for fast debugging.
Embedded System Bundle TD
The Embedded Bundle Trigger and Decode (TD) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TD products. For more information on this product, please see the product pages for I2Cbus TD, SPIbus TD, and UART-RS232bus TD.
DigRF v4 bus
The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
DigRF 3G bus
The DigRF 3G decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF 3G decode adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
D-PHYbus D - Decode option
The MIPI D-PHY decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
CANbus TDME Symbolic
The CAN Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic CAN support (TDME Symbolic) provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value
CANbus TDME
The CAN Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug.
CANbus TD
performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
CAN FDbus TDME Symbolic
The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic support (TDME Symbolic) provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CAN FDbus TDME
The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CAN FDbus TD
The CAN FD Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities for both CAN and CAN FD.
8B10B
8b10b Decode Option
1553 TDME
The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
1553 TD
The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
MDIO Decode
The Media Data Input/Output (MDIO) decoder provides a fast and easy way to understand and correlate MDIO bus traffic to the management of PHYs or physical layer devices in media access controllers (MACs).
AudioBus - I2S
Teledyne LeCroy’s Serial AudioBus trigger, decode, and graph package provides all the tools needed to properly analyze and debug digital audio buses. Teledyne LeCroy’s solution addresses the I2S, LJ, RJ, and TDM variations of the audio bus standard.
ARINC429bus DME Symbolic
The ARINC 429 Decode (D) and Decode, Measure/Graph and Eye Diagram (DME) options both provide Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities. Measure/Graph (M) provides automated protocol-specific bus performance, timing, and digital data extraction measurements and waveforms. Eye Diagram (E) provides one button eye diagram creation from the physical layer signal, various eye measurements and pass/fail indications/debug.
ARINC429bus DSymbolic
The ARINC 429 Decode (D) option provides Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities.

Высокоомные активные пробники

ZS1500-QUADPAK
Набор из 4 пробников ZS 1500, 1,5 ГГц
ZS2500-QUADPAK
Набор из 4 пробников ZS2500, 2,5 ГГц
ZS1500
Активный пробник, 1.5 ГГц, 0,9 пФ, 1 MOм
ZS2500
Активный пробник, 2.5 ГГц, 0,9 пФ, 1 MOм
ZS4000
Активный пробник, 4.0 ГГц, 0,6 пФ, 1 MOм
ZS1000
1 GHz, 0.9 pF, 1 MOhm Active Voltage Probe

Remote Control/Network Options

USB2-GPIB
External USB 2.0 to GPIB IEEE 488.2 adapter

Высокоомные активные пробники

ZS1000-QUADPAK
Set of 4 ZS1000 Active Probes
ZS1500-QUADPAK
Набор из 4 пробников ZS 1500, 1,5 ГГц
ZS2500-QUADPAK
Набор из 4 пробников ZS2500, 2,5 ГГц
ZS1500
Активный пробник, 1.5 ГГц, 0,9 пФ, 1 MOм
ZS2500
Активный пробник, 2.5 ГГц, 0,9 пФ, 1 MOм
ZS4000
Активный пробник, 4.0 ГГц, 0,6 пФ, 1 MOм
ZS1000
1 GHz, 0.9 pF, 1 MOhm Active Voltage Probe

Пассивные пробники

PP024-1
500 MHz Passive Probe, 5mm, 10:1, 10 MOhm
PP022-1
500 MHz Passive Probe, 2.5mm, 10:1, 10 MOhm
PP009-1
÷10, 500 MHz, 10 MΩ, Passive Probe
PP008-1
÷10, 500 MHz, 10 MΩ, Passive Probe (Total of 1 Per Channel)

Probe Parts and Kits

PK111
ZD replacement kit
PACC-ZD008
Replacement Leadset for ZD200
PACC-ZD007
Replacement Accessory kit for ZD200
PACC-ZD006
Small IC adapter for ZD differential probeQty 2
PACC-ZD005
Swivel tip adapter for ZD differential probeQty 1
PACC-ZD004
Tip saver for ZD differential probeQty 2
PACC-ZD003
Long spring ground for ZD differential probeQty 2
PACC-ZD002
Solder-in lead for ZD differential probeQty 2
PACC-ZD001
Y lead Adapter for ZD differential probesQty 1
PACC-LD004
Long Right Angle Lead
PACC-LD003
Short Right Angle Lead
PACC-CL001
Probe Microclip (0.5 mm pitch)
PACC-CD008
Bendable Pogo Ground
Dx20-Cable-HiTemp
Replacement 30" matched cable set for use with Dx20 HiTemp Solder tip leadset
Dx10-Cable-HiTemp
Replacement 30" matched cable set for use with Dx10 HiTemp Solder tip leadset
Dx20-SI-HiTEMP
Replacement Solder tip leadset for use with D620/D320 and temperature extension cables
Dx10-SI-HiTEMP
Replacement Solder tip leadset for use with D610/D310 and temperature extension cables

Оптические и электрические преобразователи

OE455
Long wavelength O/E Converter (950-1630 nm)
OE425
Short wavelength O/E Converter (500-870 nm)

Высоковольтный пробник с гальванической развязкой на основе технологии передачи аналогового сигнала через оптоволокно

HVFO-6M-FIBER
HVFO6m Optical Cable Acc'y
HVFO-2M-FIBER
HVFO 2m Optical Cable Acc'y
HVFO-1M-FIBER
HVFO 1m Optical Cable Acc'y
HVFO103-XMITTER
HVFO103 Spare Amp/Mod. Xmitter
HVFO100-40X-TIP
HVFO103 +/-40V (40x) Tip Acc'y
HVFO100-20X-TIP
HVFO103 +/-20V (20x) Tip Acc'y
HVFO100-5X-TIP
HVFO103 +/-5V (2x) Tip Acc'y
HVFO100-1X-TIP
HVFO103 +/-1V (1x) Tip Acc'y
HVFO103
High Voltage Fiber Optic Probe, 60 MHz Bandwidth. Includes soft-carrying case. Requires attenuating tip (ordered separately). Includes Qty. 1 1m Fiber Optic Cable

Высоковольтные дифференциальные пробники

ADP305
Высоковольтный дифференциальный пробник 1 кВ, 400 В, 100 MГц
ADP300
Высоковольтный дифференциальный пробник, 1 кВ, 400 В, 20 МГц
AP031
Высоковольтный дифференциальный пробник (÷10, ÷100), 700 В, 25 MГц
HVD3605А
Высоковольтный дифференциальный пробник, 6 кВ, 100 MГц с функцией автоустановки нуля
HVD3206А-6M
Высоковольтный дифференциальный пробник, 2кВ, 120 MГц с функцией автоустановки нуля
HVD3206А
Высоковольтный дифференциальный пробник, 2кВ, 120 MГц с функцией автоустановки нуля
HVD3106А-NOACC
Высоковольтный дифференциальный пробник без наконечника, 1кВ, 120 MГц с функцией автоустановки нуля
HVD3106А
Высоковольтный дифференциальный пробник, 1кВ, 120 МГц с функцией автоустановки нуля
HVD3102А-NOACC
Высоковольтный дифференциальный пробник без наконечника, 1кВ, 25 МГц с функцией автоустановки нуля
HVD3102А
Высоковольтный дифференциальный пробник, 1кВ, 25 МГц с функцией автоустановки нуля

Active Voltage Rail Probes

RP4000-UFL-PCBMOUNT
Qty. 10 U.FL 3mm x 3mm PCB mounts (additional to those supplied with RP4030)
RP4000-MCX-CABLE-UFL
Qty. 3 3 GHz MCX to U.FL ultra-miniature coax cable, 8cm long (add'l to those supplied with RP4030)
RP4000-MCX-PCBMOUNT
Power/Voltage Rail Probe. 4 GHz bandwidth, 1.2x attenuation, +/-30V offset, +/-800mV
RP4000-MCX-LEAD-SI
Qty. 3 MCX 4 GHz solder-in lead accessories (additional to those supplied with RP4030), 18cm long
RP4000-BROWSER
RP4030 350 MHz Browser Tip accessory. Includes 0 Ohm (1x), 450 Ohm (10x) and 950 Ohm (20x) tips.
RP4030
Power/Voltage Rail Probe. 4 GHz bandwidth, 1.2x attenuation, +/-30V offset, +/-800mV

Дифференциальные усилители

DA1855A-RM
DA1855A with rackmount
DA1855A-PR2-RM
Rack mountable version of the DA1855A-PR2
DA1855A-PR2
2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters
DA101
10:1, 1 MOhm Passive Attenuator
DXC-5100
100:1, 2.5KV Passive High Voltage Probe Pair
DXC200
50 MHz low capacitance Passive Differential Probe Pair
DXC100A
Selectable 100:1 or 10:1 , Passive Differential Probe Pair
DA1855A
High-performance 100 MHz Differential Amplifier

Дифференциальные пробники (4-6 ГГц)

D620-A-CCNIST
NIST Calibration for D620-A. Includes test data.
D610-A-CCNIST
NIST Calibration for D610-A. Includes test data.
D420-A-CCNIST
NIST Calibration for D420-A. Includes test data
D410-A-CCNIST
NIST Calibration for D410-A. Includes test data.
Dx20-QL-3SI
QuickLink Solder-In starter pack for use with Dx20 amplifier
Dx20-SI
Replacement Solder tip lead set for D420/D620
Dx20-QL
QuickLink Adapter for use with Dx20 amplifiers
Dx20-HiTemp
WaveLink Temperature Extension cables for Dx20.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead se
Dx10-QL
QuickLink Adapter for use with Dx10 amplifiers
Dx10-HiTemp
WaveLink Temperature Extension cables for Dx10.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx20-PT-KIT
WaveLink Dx20-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with MechanicalInterconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets(Qty. 2).
Dx10-PT-KIT
WaveLink Dx10-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with MechanicalInterconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets(Qty 2).
WL-PBUS-CASE
WaveLink ProBus Platform/Cable Assembly Kit for D410, D420, and D300A-AT WaveLink Probes.
D600A-AT
WaveLink D600 6 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips.
D400A-AT
WaveLink D400 4 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips
D620-A
WaveLink D620-A 6 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Sold Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D610-A
WaveLink D610-A 6 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with So Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D420-A
WaveLink D420-A 4 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Sold Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D410-A
WaveLink D410-A 4 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with So Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D420-A-PS
4 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
D410-A-PB2
4 GHz ProBus2 Differential Probe with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1) and Dx10-SP Square Pin (Qty. 1)

Высоковольтные пассивные пробники

PPE6KV
Высоковольтный пробник , 1000:1 400 МГц, 5 MOм/50 MOм
PPE5KV
Высоковольтный пробник , 100:1 400 MГц 50 MOм
PPE4KV
Высоковольтный пробник ,100:1 400 МГц , 50 MOм
HVP120
Высоковольтный пассивный пробник 1 Вскз , 400 МГц

Дифференциальные пробники (<= 1.5 ГГц)

ZD500
Активный дифференциальный пробник 500 MГц, 1,0 пФ, ±8 V
ZD200
Активный дифференциальный пробник, 200 МГц, 3,5 пФ, 1 МОм, ±20 В
ZD1500
Активный дифференциальный пробник, 1,5 ГГц, 1.0 пФ, ±8 V
ZD1000
Активный дифференциальный пробник, 1 ГГц, 1,0 пФ, ±8 В
AP033
Дифференциальный пробник до 500 МГц

Токовые пробники

CA10-QUADPAK
Programmable ProBus Current Adapter
CP500
Токовый пробник до 500 А, 2 МГц
CP150
Токовый пробник до 150 А, максимум 500 A < 30 мкс, 10 МГц
CP031A
Высокочувствительный токовый пробник до 30 A, 100 МГц
CP031
Токовый пробник до 30 A, 100 МГц
CP030A
Высокочувствительный токовый пробник до 30 A, 50 МГц
CP030
Токовый пробник до 30 A, 50 МГц

Адаптер для пробников

CA10
Programmable ProBus Current Adapter
TPA10-QUADPAK
Set of 4 TPA10 ProBus Probe Adapters
TPA10
ProBus Probe Adapter for TekProbe-BNC Probes
Цена: 50 001 $
Поверка 9000 руб.
Гарантия 36 месяцев
Госреестр № 67292-17 до: 14.04.22 г.